• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by gstboy69

  1. G

    Mep 803a Deep Sea :) Happy!!!

    Hello, I have a Generac ATS from a Gas Generator. I have two mini breakers for protection in ATS. The deepsea control all. The generator work like a Champion. I have a lot parts for sale if you need something : transducer,transformer, Frecuency trip relay ect. Enclosed a picture of house Amp...
  2. G

    MEP-802A/803A S1 Master Switch Source - Electroswitch

    I have one switch spare if you need!
  3. G

    MEP-802A/803A S1 Master Switch Source - Electroswitch

    My friend I have some parts in stock if you need one let me know.
  4. G

    Mep 803a Deep Sea :) Happy!!!

    My best project . I installed a Deep Sea 4520 in mep-803a with ATS transfer Switch programmed for 15 second the house have power. Its a project of all the day but beleive me is the best option to eliminate all the cables,only use one pump the auxiliary fuel system deleted,protections all its all...
  5. G

    Mep-803a Fuel Pump Help

    :confused:
  6. G

    Mep-803a Fuel Pump Help

    Hello, I tell my history my CB1 is trip all the time when I tried to start my Generator. I work with some troubleshooting and find the Diesel Pump bad. I need this pump but I dont find in summit its out stock E1074!! This pumps are 24v. I accept your recommendation. Thanks forum.
  7. G

    Mep-803a Switch,Frecuency Trip Burn

    Thanks my friend!!
  8. G

    Mep-803a Switch,Frecuency Trip Burn

    When the generator was on, adjust the frequency a little to take it to exactly 60hz with the generator handle. I understand the failure may be related to this matter. The only thing that I adjusted was the frequency and 15 minutes after adjusting it the generator turned off, I smell of a...
  9. G

    Mep-803a Switch,Frecuency Trip Burn

    Hello, Thanks for the information yes its burned, I opened the relay and the internal chip is opened and crack. When I removed the relay was white of fumes in the interior.
  10. G

    Mep-803a Switch,Frecuency Trip Burn

    :( ;( help me!!!
  11. G

    Mep-803a Switch,Frecuency Trip Burn

    Hello, Today my generator after 2 hour on,shutdown and I foun the problem the Switch Frecuency Trip Burned. I dont found exactly this model. Please if something have one for sale let me know please enclosed the pictures. Thanks
  12. G

    MEP-803 Aux Fuel Circuit

    Thanks for the information. I THINK Thats the reason of my mep 803a don't start with the Aux tank,I remove all the diesel from the daily tank and the fuel lights always on and don't start. Tomorrow I fill the tank a half crossing my fingers she started. I have auto started board with ATS.
  13. G

    Mep 831a Fault Help me!! Fuel Light on and turn off

    Thanks for the advice. You have the TM?
  14. G

    Mep 831a Fault Help me!! Fuel Light on and turn off

    Thanks I think is stuck float like you said!!!! I removed one gallon of diesel from the tank. And the generator run like a Champ. I put a wire inside the tank for move the float and removed one gallon of diesel. The generator starts and worked like a champion. On the other hand, the diesel...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks