• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by Gunnar1071

  1. Gunnar1071

    2013 SoCal Fall Rally

    I am off that weekend, but will be in the '82 Burb. Had to suspend my M1009 dream for a larger, more family friendly diesel. It is only about 20 miles from the gold claim we mine on, so I might cut out early Sunday to do some prospecting. So please forgive the bright red target I will be...
  2. Gunnar1071

    SBC Water Pump!

    Back from a month hiatus, this thread! rolling18 here is the setup for the oil pump. Technical Tech week, Recycle SBC oil pump into a usefull drill pump - THE H.A.M.B.
  3. Gunnar1071

    come get WMO San Diego

    How to load in the bed of the dually???? Wish I had an empty 55 gallon right now.
  4. Gunnar1071

    1009 works for its keep today

    You need to have a couple "privates" or "grandprivates" to handle that for ya.:-P
  5. Gunnar1071

    m1009 pintle and mount torched off

    Zerogas, try here. Classified Ads - Steel Soldiers::Military Vehicles Supersite Or http://www.ebay.com/itm/military-cucv-truck-blazer-m1009-pintle-hook-m1008-m998-/220825417885
  6. Gunnar1071

    picking up a M1009 Cucv

    Nice, how was the recovery from the P/O?
  7. Gunnar1071

    Lil Ruthie gets some new shoes

    Super old thread, but check out Mark's site and give him a call. 100Dollarman - Military Surplus Home!
  8. Gunnar1071

    Looking for solar panel and inverter opitons

    RV Solar Panel Mounts Inverters - Battery Based, Off Grid, RV & Backup I went in July and looked at a property just outside Flagstaff, AZ. that was run on a system put together by Northern Arizona wind & sun. Good quality mount, great Kyocera 185 watt panels and a clean install. Everything I...
  9. Gunnar1071

    Howdy from a Newbie

    I know it is a 3 month old thread, but that plastic fuel filter near the muffler has me worried .:shock: Just saying for safety's sake.:-)
  10. Gunnar1071

    CUCV wiper issue

    :beer: With it being a new motor, I would check this also, 26 y/o wiring may need a little mending.
  11. Gunnar1071

    DirtBag Fall 2011 ???

    I need someone to purchase my 5.0 off of craigslist so i can hit up Hundy for a m1009 and get a few fixes, mods done in the next 30 days......:cry:
  12. Gunnar1071

    M1009 fuel tank disconnected

    Page 61 has the lines running from the tank along the frame rail. Then just keeping scrolling down and it covers all the way to the GP's. http://www.jatonkam35s.com/CUCVTechnicalmanuals/TM9-2320-289-34P.pdf
  13. Gunnar1071

    Ran out fuel today!!

    Depends on if you get the drums for free, etc... A basic, full cost (no freebies) systems around me is as follows: 2 55 gallon drums = $45 400 micron barrel screen = $30 55 Gallon WVO Oil Filters - 75, 100, 200, 400, 600 Micron - Utah Biodiesel Supply 75 micron barrel screen = $30 Barrel...
  14. Gunnar1071

    Yet another motor and mod

    Here is a mod for your pump. Upgrading the Clearwater Pump for Biodiesel Processors | Processor Upgrades
  15. Gunnar1071

    Water to air intercooler, Charge air cooler, Aftercooler...

    Not an MV but I have run a Water to air intercooler before. I had a buddy box in the stock intercooler on a 2004 Neon SRT4, with an inlet port at the bottom and an outlet port at the top. Then ran the outlet to a Mercedes diesel oil cooler above the intercooler (used as a heater exchanger /...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks