Recent content by hanley

Called Hillbilly Wizard. Problem solved.

Thanks Phil

Can a Water Outlet, Engine PN 12554091 (6.5L) be used on a 6.2L motor in lieu of PN 14028917? The reason I am asking is because upon replacing my thermostat in my M1009...that pesky bottom bolt stuck and broke bottom of housing and I may have access to a Water Outlet from a 6.5L motor...

Nuke- Couple days worth of frustration here using the Kat's as well.....going into the same hole you are, drivers side right behind the mount. I used the same one the Kats 11612.....tightened per directions...no leaks....finally got her topped off....thought I was done....put her in gear to...

Pump for lift bed is 24V....winch is 12V

Agreed. Still working on installing some gussets between the upper and lower extension plates to stiffen up the extension and tie into the frame. Waiting to move them forward when I figure out how the gusset is going to work. Thanks for the advice, much appreciated. Hanley

Spent Memorial Day weekend indoors finishing up a couple of projects on my M35A3. It rained all weekend....so it was kind of a blessing....forced me to be indoors. Installed a C & C Equipment Dump Bed kit and also installed a 16,800 lb Winch. Dump Bed install went pretty smooth. And man is...

marchplumber- my brother was telling me about a DevilDog plumber that works for Reading.......are you one and the same? HANLEY

flyxpl- Appreciate the input very much Sir! Just want to do everything on the up-and-up so as not to screw somebody over down the line that may need to register one in my AO. Thanks again. HANLEY

flyxpl- Thanks for the info. I figured as much about the hassle of VIN verification because of the lack of the 17 digit VIN. Have already talked with a Trooper that can do a VIN verification for me so I'm covered on that one. Also aware that GL will send a title since I am in ILL just want...

Have searched high and low.....maybe I missed it. Looking for info on best way to Title an M35A3 (I recently got at GL Auction Wisconsin) in Illinois. Plan to use as personal vehicle/non-commercial. Would really appreciate help from someone that has been this route. Thanks, HANLEY

Noob Here.......just joined forum last night....figured I better since I bought an M1009 last fall and just got (2) M1008's off a guy today. This door fix thread worked PERFECT. Went to parts store, bought bushings.....no more slam closing....my passengers will be very thankful. Wasn't brave...