Recent content by Hummingbird

S6 switch upgrade I purchased an S6 from the big auction site. It is an Electroswitch series 31, 31907LW, should be the version 3 of S6. This switch has seven positions, the original switch has six positions. Has anyone else experienced this?

Hard Head, Have you been able to make any more progress on this?

Turns out it was the K2 relay. I appreciate all the help.

Thanks CS, I’ll definitely give that a try.

Thanks Guy Well, I whacked on the starter solenoid a few more times and bingo the circuit opened. I put the new S1 back in and no problem. After dead cranking multiple times and attempting a start from S1 multiple times the circuit is closed again. I whacked the solenoid some more and still...

I tried that a few times and no change.

Thanks Guy for the quick reply. Yes the S1 worked before, changed it after reading on these forums about the superiority of the 75902LV. I have just put the old working S1 back in and verified the S1 wiring correct. I still have 25V between the disconnected battery negative cable and battery...

Got this generator last year from an auction and haven't had a lot of time to tinker with it. It is a 1999 machine with 1500 hrs on the gauge, no reset. Last year I put new oil in it, oil filter, new batteries, and installed the fuse for the quad winding. Used the dead crank to turn the...

When replacing the version 2 switch with the version 3 does the jumper wire also get placed on the version 3?

I would be in for a set.

Thanks Zed! Now if I could find an upper radiator hose I’d be golden.

I just got an MEP 803A and it needs new radiator hoses. Can’t believe there this difficult to find. Also looked to replace the thermostat and it’s 50.00 at the mountain place, are you kidding me.