• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by HUMVEE1

  1. H

    Anyone have pictures of a luverne brush guard on ECV?

    I left the shackle bolts in place.
  2. H

    Anyone have pictures of a luverne brush guard on ECV?

    Did not drill holes
  3. H

    Anyone have pictures of a luverne brush guard on ECV?

    I did post a pic
  4. H

    HMMWV Lug Nuts

    Many USMC trucks had undercoating applied and some of this was on the hubs and nuts. You can see it on the nuts. If the nuts and studs are black and gooey, you will not be able to turn them by hand. Army Hmmwv models did not have the undercoating and had non under coated nuts and studs. These...
  5. H

    HUmvee seriial #

    1985
  6. H

    M1123 A2 - Intermittent sound

    If you want to check the fan clutch without unplugging anything, just turn the steering wheel all the way to the left with the engine running. Fan comes on.
  7. H

    WD40 paint refresh

    Pledge works much better. Soft bristle brush and pledge. It dries and the colors are much more vibrant, and the sun faded green matches the green that has not been subjected to the sun. Smells like lemons ! Takes two cans. Works wonders on clean tires too. Not shiney like Armorall. WD40 the...
  8. H

    1992 M998 First Time HMMWV

    Thanks, I'm old.
  9. H

    1992 M998 First Time HMMWV

    Also, is the low beam burned out on the port headlight ? First indication of a grounding issue.
  10. H

    1992 M998 First Time HMMWV

    Also, your photo of your batteries shows a problem. The right battery needs to be rotated 180 degrees. It is hooked up properly but if it was rotated 180 degrees the cables would not cross over the bracket in the dangerous way that they do. Could short easily.
  11. H

    1992 M998 First Time HMMWV

    Ok so just go ahead and disconnect the batteries. Order a new box that is the latest edition along with the matching GPC. No matter what they do or don't do they should be a matched set. Connect the original leads to good glow plugs and you will be set. Dont reconnect your batteries until...
  12. H

    1992 M998 First Time HMMWV

    I just a guess, but there was a PCB made that had a separate glow plug harness coming out a hole near the washer reservoir. This would account for 16 glow plug leads and it is the original leads that are taped up and the other set connected. This is a very dangerous condition because that is...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks