Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Many USMC trucks had undercoating applied and some of this was on the hubs and nuts. You can see it on the nuts. If the nuts and studs are black and gooey, you will not be able to turn them by hand.
Army Hmmwv models did not have the undercoating and had non under coated nuts and studs.
These...
If you want to check the fan clutch without unplugging anything, just turn the steering wheel all the way to the left with the engine running. Fan comes on.
Pledge works much better. Soft bristle brush and pledge. It dries and the colors are much more vibrant, and the sun faded green matches the green that has not been subjected to the sun. Smells like lemons !
Takes two cans. Works wonders on clean tires too. Not shiney like Armorall.
WD40 the...
Also, your photo of your batteries shows a problem. The right battery needs to be rotated 180 degrees.
It is hooked up properly but if it was rotated 180 degrees the cables would not cross over the bracket
in the dangerous way that they do. Could short easily.
Ok so just go ahead and disconnect the batteries.
Order a new box that is the latest edition along with the
matching GPC. No matter what they do or don't do they should be a matched set.
Connect the original leads to good glow plugs and you will be set.
Dont reconnect your batteries until...
I just a guess, but there was a PCB made that had a separate glow plug harness coming out a hole near the washer reservoir. This would account for 16 glow plug leads and it is the original leads that are taped up and the
other set connected.
This is a very dangerous condition because that is...
I added AC. Works....sort of.
Cools truck but not like an F350 Ford where cold air is blowing on my face.
8000 BTU min and I will probably mout the gen on a hitch mount rack.
Cant hear the gem on the highway. Can't hear the truck at a stoplight. Sort of cancel each other out !
Ace Hardware has the rubber well nuts that go into the holes on the A and B pillars but you also have to buy new machine screws from Ace and that means opening the well nut packages to test the fit while nobody is looking.
The rope channel that goes on the top of the windshield frame is a tough...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!