Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I had a similar problem on my M1009 and it was a blown fuse (heater fuse ) I think, in the fuse block . Seams like the heater and the exciter for the gen is on same circuit.
Transmission shifting late
My trans was also shifting at 35 mph and 50 mph , I checked for vacuum and had 15psi replaced modulator on trans and rubber lines still shifted at 35 & 50 mph . put old modulator back on same ? checked adjustment at IP finality bypassed it . tried driving and shift...
warm starts longer than cold starts
1st off how many miles on M1009 , you will need to replace all rubber fuel lines and make sure your filter base does not leak ( spin on base ) is the most chosen way to go . And most often a electric fuel pump as well . when you get an tight sealed fuel...
Over doing it while towing
I have towed an M1009 with another M1009 and that was pushing the limit. It was for only about 50 miles so I stayed under 55 but was over a steep mtn . braking was more of an issue with my tow but it was the biggest tow rig available.
Got around to checking & repacking the front bearing today had to replace inner bearing & race on passenger side due to rusty bearing ( bad seal also ) Found the tool at Auto-zone for $20.00 plus tax . Thought while I was in the mood I would replace the I P throttle shaft seals , I had bought a...
When I 1st got my 85 M1009 it had starting issues . I installed new glow plugs did the 12 volt conversion, checked and fixed alternators and I think best thing I did was start using( Diesel additive ) I add as described 4 oz per 5 gal. It now cranks as soon as wait lights goes off , and after...
Had a great time and met some very nice folks at the 3rd annual show Mountain Ranger Surplus store this year . Had to leave early but saw some nice Deuce & halves ..
Got the M1009 Painted today ( Home depo Paint ) Not bad for my 1st paint job . The Passenger side turned out very good , as the driver side did not blend together due to sun heating the metal (painted outside ) but can blend with the other colors when finishing camo . I now no to Paint in the...
Getting ready for new paint job
Took two days this weekend to do body work for new paint job .I am doing the home Depo 383 char house paint , the color looks to be spot on . Will no more when applied hope for the best as this will be my 1st ever paint job .. my way of thinking How bad can I...