Recent content by Mack 121472

24.5 will fit as long as you have budd wheels , hub piolited wheels will not work, I have a M920 is why i know this an had my drums turned down to run 20 in himit wheels,an 53s think iam goin to buy 15.8 now to be different . Good luck.

Sounds like it is out of the air compresser not the switch , should only be air there. The air compresser seals are leakin oil in to the system some where to get to the switch.

i dont beleave what i just read i have a m920 an it will out do any 5 ton any day of the week pulling or haulin an if you have a 5 ton an want to lose some money bring it on .an it has a double frame an full lockers - detroit an they do not hop around like a 5 ton . a m920 is built to handle...

a cat tractor key will also work i used one in my m920 .i have the orgenal key if any one neads one let me know. :driver:[thumbzup]

we have 2, 2.5 tons an 8, 5tons an 1, 20 ton an we run 395s an 1600s the 5 tons will out do the duces pulling all the way around an the 20ton will pull more than a 5 ton do to the fact of weight a 5ton weighs in at 19500 an a 20 ton is 30000 # i run 15.5 pounds in the frount an 7.5 in the back...

you can air it up off your other truck or back the brakes off there is a bolt in the brake chamber it gos in the end an you give it a half turn after it drops in to the slot then tightin the nut on each chamber . note you will have no brakes. if you nead more help text me or call i can help you...

I have 14 of them allso if anyone is interested an iam in new mexico.:ditto:

:)Old Lincoln Iron So did you get your truck home. you nead to come check out my 1600s it looks tuff as ****

Thats a nice looking ride...[thumbzup]

take the filter off an fill with fuel an fill the fuel pump up with atf it is in the top of the pump it has a pipe plug fill it up an speen it over an spray startin fluid in the air breather till it starts .

Sorry to say but you nead to find a better truck to start with if you want to use it be fore you die. it will cost more than the truck is worth to buy all the parts to get it up an running.

Rodney has don my doug pack real good he has all sizes an makes here is his #713-305-9993 tell him Linn the septic tank guy sent you he will hook you up.fat lady sings

i in stalled himitt wheels on my m920 an a 818 tractor all you do is re install the iner nut an set the wheel on an the iner spools works great it is long enough to reach thrue the himitt wheels if you have ???? call me it is easy to do 575-491-4422 my name is Linn

HI i had my m920 from barstow to Alamogordo N.M. 850 miles an i payed 2100 us bucks an i priced it all over try J H ROSE in Abq. New Mexico they are great to work with this was just 60 days back .dont for get you can only load certain days.thats somethink they nead to know.:driver:

Try safe co. they are cheep an did my m920 for 450 for 6 months.