Recent content by mavucci

i use the golden rod filter/ separator from my aux tank. The fuel in the 30 gal aux tank was about a year and a half old. Treated with a biocide. I live in Massachusetts. I run the generator every other month and top off the onboard tank from the aux tank. 2 weeks ago we lost power for 3 days...

Do you have any specs on the design of the hood or any CAD drawings that I can use to make my own hood? Right now I’m just using a stall mat tied down on top of the unit to keep snow and debris out from the top radiator ports. I’d like something like that hood so when I am at work the wife...

I like the hood design. Are you selling them?

Just got a quote back from Transhield for a cover for the 802. $276 for the cover and $65 to ship to Massachusetts. Totalling $341 for the cover. I think i will stick to my $25 stall mat that covers the top. and lets air flow thru the rest of the unit.

The wind hasn’t stopped howling I’m waiting for the chimney cap to fly off. The lights only flickered once but my 802 is ready to go!

I tightened up the hose clamp yesterday and today I didn’t notice anything where it was leaking. If the drain hose wraps like you describe is replacing it just fitting a new hose over the barbed ends then tighten the hose clamps?

So I just set up a 30gal fuel cell on the back of my gen trailer. I drove to the fuel station to top it off and check the aux pump. When I got home before I started up the generator I noticed oil leaking from the drain hosejust a few drops that dropped into the floor of the generator. I’m not...

I changed everything out this summer. New fluids and filters. Only 70hrs on the machine

Thankyou. I will check it out on my next day off. Whenever that may be. Lol

I have tried searching on here and on google. My electrician just installed a transfer switch on my home so now i am ready for a power outage with my MEP802. I have an electric oven to exercise the machine. When i hooked the machine up to my house to run everything it ran great and was able to...

J

How did you mount the box to the unit? Did you use the screws on the unit? Or use self tappers or nuts and bolts with lock rite? I am thinking of doing the same with my 802.

Just ordered the brass fittings for the ultimate wellnut repair. I drained as much of the tank thru the drain. How is everyone cleaning out the inside of the tank when they have the well but out? Just wiping it down with a rag? Shop vac? Hiding it out with water and drying it? I also drained the...

Thankyou all for the input

ok thank you, so if its not connected to the house it should be grounded got it. The gen set came with the grounding rods but i think i am missing the clamp to hold the wire to the rod. and the rods are threaded on both ends so i think i need double female adaptors? also on the trailer i saw a...