Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Pics are here.... http://www.steelsoldiers.com/showthread.php?151667-Bought-a-hitch-and-a-winch&p=1845548&highlight=#post1845548
I don't have a way to mount it to the front, but i suppose i could always add a receiver hitch up front.
I store it in the bed, i have a receiver hitch bolted to the...
$400 12k harbor freight winch attached to a receiver mount bracket.
this mounts into a conventional hitch bracket i bought off the auction site for $60. It bolts up where the pintle is.
standalone 12v battery for the winch.
I always get stuck nose first, so being able to winch from the rear...
As far as ordering a new starter... do they all share the same starter or do i need one unique to a 6.2? Anyone have a good source? I would rather support our members and vendors.
I have the one piece cover. So it needs to come off? Makes sense because I don't see how else the starter would drop free. Looks like the y pipe has to come out too?
I will need a new gasket for the cover I assume.
Seems like if i run a jumper from the big positive post i labelled A, to the solenoid spade i labelled C, the starter should operate (same as shorting S and T on the STE/ICE ?) according to the wiring schematic.
Also. I'm troubleshooting this starter.
I can meter 24v between the big posts.
I also meter 24v between the big positive post and the spade connectors on the solenoid. Is that normal with the truck off? I was assuming the spade connector on the solenoid should only get juice when cranking...
I've checked the TMs and it basically says remove wiring, remove lower bolts, remove the end bolt and remove with jack.
Well i have it loose, but i can't fit it out between the frame rail and the oil pan.
I can't get enough of the pinion gear out of the bell housing to begin lowering it, when...
Just curious if anyone else got a letter from the defense logistics agency inspector general. My notice is basically making me aware that I cannot export the vehicle per the GP auction and end use certificate. It also says I have to keep records if I sell it. I just find it weird that I'm...
if you are doing the output seals, you are going to have to remove the spindle.
that entails removing the steering arm cover, removing the spindle nut (you may need a special tool for that depending on what kind of nut you have), then removing the spindle.
retorquing the spindle correctly is...
That gear oil, its in the hub.
It can leak from the input seal where the halfshaft enters, the output seal where the spindle exits, the plugs, the steering arm cover, or the inspection cover.
With that, it is likely from a seal.
Where in FL are you?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!