Recent content by pah556

Have you found out what shipping cost is to Sweden, CAPSARME? I will go with one of the new ones if you still have them, just pm me about the cost. Could be 50-100 USD, so be it.

That´s what I just finished 15 min. ago. Now I just let it sit for a day (90-95 F), after that I am going to take a vacuum cleaner and fabricate some narrower hose to it, to get all the gravel and rust out. I got the tank down from under the truck, I can reuse the straps and bolts and the screws...

Any questions? Time for a new one, or what?

I know of the place, and no, I don´t have the parts yet, or ordered. I still have to contact CAPSARME about that for shipping. What do you need from them in Sösdala?

If the two on the right sat on a 318, then it might be them. Is the clip screwed to the choke axle? A bit hard to see in the second picture (first 2 on the left). I would also need the tiny rod that connects the vacuum pull of with the clip. This one...

No sweat, I´m in no hurry. It´s not a DD. At least you could find this clip or link (does it even have a name?), I would be very happy, because they are impossible to find on the net, unless you buy a whole carb. If you find it, I have a verified Paypal account if that would do it for cost plus...

Wow, that would be great, the shaft has a screw hole in it, the screw is still there but no clip/link/connector or whatever it´s called... I think it´s welded on in the picture. I´ll put on another pic, it´s for a 318, no AC or anything if that matters. I have the choke pull of and the...

Nope, it´s this one lever on the choke shaft, wich in turn is connected to 2 rods, one from the choke pull of and one from the thermostat you linked to. It´s only that this lever is attached with a screw to the shaft, I prev. thought it was the carter bbd 6537s, but it might be the carter bbd...

I already posted on ramcharger. I will try a few more... See what I can come up with.

Well, you hit the jackpot there, it is a carter bbd 6537s. I have tried carb parts com, but they didn´t have it (well, not online anyway). I could email them to ask if they might be able to get it though.

Yeah, wich one, since I already have tried half of ebay and amazon. I don´t think the other half of them don´t have them either. I wouldn´t have posted this if I had found it on one of them. Checked: Advance Napa Rockauto oreilly Summit Ecklers Carburetor parts com None of them have it, only...

Anyone have or know who has this lever? And, no, summit-autozone-o´reillyautoparts-advanc. I have already checked them, as I have fleabay. I´m in Sweden, so it´s a bit funky to just go to a junkyard in Phoenix to pick up one. :(

Fixed. I have found a gear box with standard rotation wich I am going to mount in another way to be able to steer in the right direction. I have some info from a dutch site where they have done this after they too found out (almost) the hard way. I only need to get a pump, pully, drive belt...

Would these parts be compatible with my W200? From Rockauto site; Lares Part# 997 Reman power steering gear, reverse rotation. Edelmann Part#70933 3/8" Male Inverted Flare x 7/16" Male inverted Flare x 26 3/4". ATSCO Part#7024 Reman w/reservoir. Gates Part# 15365 Power steering belt STD w/o...

Did it work out? Here is a pic of someone from the Netherlands who did the same thing, a 2wd box instead of a 4wd. But they fixed it. http://www.chaosboyz.nl/images/ervaringen/stuurbekrwouter/stuurbekrachtiging_04.jpg