Recent content by RANDYLBARNES

I am lookig for someone with top bows for the bed. I have the cover but not the bows. The Belgian model has fold down and removable sides unlike the Swiss model. I was measuring the bows from my 105 trailer and could probably make them work if i knew the dimensions. Any help would be appreciated.

The muffler is a napa 21470. Boy does it make a difference.

dt466 and fuller rto6610 I have been doing a little research about the engine swaps myself. I am looking at a truck that has a DT466 rated at 250 HP with a top rpm of somewhere around 2700 to 2800. It has a Fuller RTO6610 10 speed transmission. The high gear ratio of the RTO6610 is .80. I...

The round shaft with a flat end is what I am looking for. One person that I spoke with called it a paddle. I have the adapter and piece that threads into the transfer case but am missing the paddle.

I am in need of the speedo drive gear in the transfer case that drives the input of the 90 degree adapter that the speedo cable hooks to. If I am correct there are 2 different drive gears for 9.00 and 11.00 tires. I will then build an adapter box to correct the ratio. If anyone has an old...

here is a pic of my deuce on 315/80R22.5's9

I also am running the 315/80R22.5 tires on 6 hole tubeless rims. If you plan on recentering wheels I would suggest you use the outers from a 10 hole center wheel due to the fact that they are wider than the 6.75 6 hole rims. I have flipped the rear hubs and am very happy with the way it...

After flipping the hubs and installing my new super single 22.5 tires I thought I would try and figure out why my speedo does not work. When I remove the 90 degree drive from the transfer case I noticed that there is nothing in the case to drive the square drive to run the speedo cable. Is...

Can anyone tell me off the top of your head what size socket I need to remove the rear hub on my deuce? Also is it a 6 or 8 point socket?

The injection pump is easy. It is the metal injector lines that are a pain in the ass.

Can someone tell me if the driver side spring ride seat uses the same mounting holes as the box style solid seat?

Thanks for the info.

Can someone give me the TM for the wireing diagram for a 1969 m35a2c?

I recently bought a truck with what I thougth was a good sf97. Bought it from a guy in California that had bought it from a guy in Arizona. When I got it home the sf97 form was missing 1 number in the vin#. Took it to the highway patrol and they noticed that, even though the officer had made...

Why do they want you to drill the hole there? One would think that it would be better closer to the middle of the manifold so you could get temp info from both ends?