• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by ricksherryjosh1

  1. ricksherryjosh1

    DIY energy drink to get the kids to help with the truck

    Yeah been having some issues getting the grand kids to help me with the truck during the day. I have also been wondering why they haven't been sleeping well. Well I done some research and the results were amazing. https://www.youtube.com/watch?v=qJIG6tjsf5k&list=PL7699EC427564D0A5&index=9
  2. ricksherryjosh1

    MVO 6.2 Diesel ?

    Cpf like the avatar. Yeah guys still looking into this WVO idea.
  3. ricksherryjosh1

    MVO 6.2 Diesel ?

    max what mixture do you use?
  4. ricksherryjosh1

    MVO 6.2 Diesel ?

    So you have 55gal drum with a gravity fed filter back into another container?
  5. ricksherryjosh1

    MVO 6.2 Diesel ?

    Also don't want to loose the topic, but also looking for some information on filter system and pump systems (i am guessing i need a 110v and a 12v pump). From what I am reading filter it several times, and that it would be a good idea to add an extra screw on filter to the vehicle?
  6. ricksherryjosh1

    MVO 6.2 Diesel ?

    Hey guys been reading some mixed information on WVO and WMO and diesel engines. So just trying to clear some information up. I was looking for more WMO and found a good source of WVO. Some say 50/50 with diesel, some say I can go WVO with 15% of unleaded gas. I also read 30/70 kerosene. guys I...
  7. ricksherryjosh1

    $1.00 Dollar a gallon, Recycled ATF from the local 10 minute oil change

    Ok guy what would it take to run my CUCV on this stuff? Cut it with Diesel? Sounds alot cheaper than Bio Diesel.
  8. ricksherryjosh1

    My M1009 Recovery in progress

    That's a good idea, So with the amount of air or lack of means more than likely it's one side and not both. Any idea how to increase the water flow (after market products with bigger ports ect)?
  9. ricksherryjosh1

    My M1009 Recovery in progress

    Also guys from what i read today I should have to replace the Head gasket, head bolts, of course that means also the intake and exhaust gaskets. anything else you guys would knockout with the tuck torn down that far?
  10. ricksherryjosh1

    My M1009 Recovery in progress

    Yeah if you didn't know something was wrong the truck sure sounds great. I'm going to learn from this and using to move forward. This will give me an excuse to tear the top part of the engine down and get a peak at a diesel good luck with your search Wayne if I can assist you please let me...
  11. ricksherryjosh1

    My M1009 Recovery in progress

    Yeah BigRix sad to say I think it is. Will pull the heads take them to a machine shop to be inspected and cleaned. I just have to put that in front of a list of other things I had planned to do. The wife as mush as she was against me getting the truck says "maybe you should just go find another...
  12. ricksherryjosh1

    My M1009 Recovery in progress

    I hate counting on a light never know when the light may or may not be working. With a temp gauge if it's on 50 or 500 somethings not working or not right lol .
Top