Recent content by Sambor

Congrats of the new truck. I have to deal with engineers every day in the aviation industry so I know where your head is. Forget all that-- these trucks are really tough! Keep in mind that high school kids drove them, worked on them, and tried to tear them up when they were GI's. Check it over...

How about you or neverenuf posting some pics of each adjustment on the 8.3 so us dummies can follow along. With all the tubes/pipes/linkages it might be useful. I turned up my fuel under the plug on top of the pump and it made a BIG difference. Haven't done the gov yet. According to the tach, it...

Big thanks to all for the info. I will try all this weekend. Wreckerman, I wondered if it would do that-- my 4WD pickup does exactly that especially at full lock either way. John

HI Shrapnel, I got 931A2 tractor several months ago in Oklahoma. It had 15 hours and 196 miles showing. I did the walkaround when I picked it up. The gladhand is the air line connections for trailer brake hoses or under the front bumper for connecting the tractor to a towing vehicle. You can...

I have a M931A2. Couple of questions concerning the front wheel drive system. I have read the ops manual and looked over the TM. When I put the transfer case in low range, I do not get a front drive light indication, or any other lights for that matter. It takes a bit of jockeying around to get...

Just found this post so a day late and dollar short-- but, I found on the 8.3 cummins installed in the 931A2 like mine that it takes air pressure to engage the clutch. I know this because I thought maybe mine was bad so I applies shop air( it takes just a little) to the hose from the fan control...

How do you post a listing of your vehicles on your profile so they show up when you post?

I just finished with registering mine here in Texas. No problems what so ever. First thing -- make sure you have all the documents from GL if that is where you got it. They sent me the SF97, Government title transfer to GL, a re-assignment of title from GL to me and a notarized bill of sale from...

Those wheels are called Daytons. Very hard to come by. I have a 46 WF32. Yours looks original. Must have been a special order for Dodge because the emergency brake handle is still on the right side of the trans, just like all the rest of these model dodge trucks.

you only need to connect your indicator lamp to the low beam side-- remember it will be on with the switch in either position. Other than that, looks good-- power it up on the bench before you install it. Hook your lights up and connect it to the battery feed from the truck. NIce work...

http://www.alliedelec.com/search/productdetail.aspx?SKU=70079073 go here-- this is a heavy duty diode that mounts by its base. You can just put a ring terminal on the wire, connect to the base and solder a wire to the other side. Make sure you put it where it cannot ground. These will work...

Let me check with our suppliers for the aircraft we work on-- I will post what they have to say. JOhn

I believe my dash placard states the empty weight of my M931A2 is 20100. It seems our rules in NJ are very similar to mine in Texas

My mistake-- I gave you the amps for I lamp-- you will need a fuse and diode for at least 10-15 amps. SORRY!

AH Grasshopper-- you getting electricity now! Yes, a diode is a one way valve so to speak. It will have an arrow on it to show which way the electrons will flow. Radio Shack will have what you need probably. When you wire your switch up- it will make no difference which way you install the...