Recent content by seabee mike

It gets quite cold in Northern NV. The system is programable up to 45 sec delay. I have never used throttle to start. Until the other day I did not know about pushing the pedal for fast idle. The largest deal is the alarm but when there is ice and snow out I like to get into a warm truck. It...

I have bought a viper alarm / remote start system and was thinking of adding it to my Blazer. Has anyone here does this yet? Looks easy enough but you never know.

Thank you for the help. It runs so good now.

Turns out the card is fine. I checked all but 1 fuse . was sidetracked by the melted fuse. It fired right up yeaaaa for me. I guess having a spare card is a good thing.

Put it all back together wait to start light not on. or the water light. No clicking from the glow plug relay .guess the card is bad? one is on the way. How do I get the old one out? just pull like ****? it feels like its stuck if I just pull.

mine is fixed. Took it apart and made sure it was dry. must have been some moisture in it. The part is good and the base is isolated from the post. Waiting for the new card now. I guess I could try the old one first. It gets dark so fast and too cold to work on at night. I did get XM stereo...

My expensive meter is not working. Last time I used it a rain storm hit us while I was working on the truck. I think its toast. It was like 100.00 unit. Just my luck.

I just like to revive this. I bought the NAPA relay GPR109 and it has the I and S marking but I checked to see if the mounting bracket is grounded by placing it on the battery post and jumping a positive wire to each post. It did not spark or anything. That means it should work right?

Thanks. life is been tough this past week and I don't know how to stop working. I have a few questions. 1. the power from the front battery, added a fuse 80 amp but ordered 120a then it wrapped around to the GPR. IS that correct? Im leaving the stock system just in case., question 2. the GPR...

How do I do that? I have a ohm meter but dont know if it works and dont know how to do that. I do know how to ground out the base and run a power wire to each post. but if I that I cant return it.

I did that the first or second thing this morning.

I bought the gpr 109 from napa per a thread here. Is that a ford? Not good? I also bought 8g wire and a mega fust 80 amp per another thread. Wire from front battery to the gpr. Yes or no? Im not temoving the stock unit. Just disconnecting it from the gpr. I found 4 gp were bad. So I replaced...

I ordered a BWD Continuous duty Solenoid. is the correct NApa ST-85 or the Ford Relay better?

I went to napa and it only had 3 post. (st-85) I see 4 on the thread but I believe that is the old stock one that was opened up. But I was very tired and who knows.

I was not refusing the search, I was asking for help. Too many people answer with use the search. I was already doing it. Just how do contact adman when I don't have an account that I can get to? I can't PM. Can't get to info, But if I knew how to I would have.