Recent content by sportman

Okay starting to get my toes wet with this unit. So far I've checked k-11 thru 21 all seem to check ok, K-2 has power on the main hot feed wire coming from the starter and will activate and crack nicely with the Dead crank switch. The A-5 has no power in any of the terminals in the prime and run...

Hello folks I've have some assistance from some you with this unit this in the past, I bought it several years ago not running from Iron Planet. I've replaced placed the S-1 switch with an Electroswitch replacing the Kraus switch as suggested. I had a friend return a favor on replacing and got...

Folks you all have forgotten that the green thing individuals buying electric cars are saving environment and the planet from using fossil fuels. But the Ignatowskis have ignored the origin of the lithium used to make the batteries comes from. Worst they sit in gas station 45 min. to an hr...

Hello folks need a fuel level sending unit for an MEP 804 generator this is the part number 127677 can someone direct were to purchase without taking out a loan. All info. is appreciated. I've had helpful replies in the past. Thank you for any advice. My previous post was moved to a different...

I'd like to Thank Guyfang for his guidance as to witch TM I should use to find the part numbers for the Isuzu 4-cyl. Folks I searched the web and some of the suppliers that I spoke with, if I would not had been sitting I would have fallen and cracked my head. I was given prices from $225.00 up...

Hello Guyfang sorry for the late reply I've been working double shifts and I haven't been able to reply sooner. I had downloaded a few of the TMS and I missed the one you pointed out. I wrote the #'s down let's see what I come up with. From my end you guys are just an awesome outstanding group...

Good morning folks I'm in need of help, I purchased the MEP-804A manufacture by Libby 7/1995 with an Isuzu 4 cyl. I've had great help from some of that have guided with locating switches and sensors. I've looked in the TM for the thermostat housing part number and have been unable to come up a...

Thanks Chainbreaker; Will check with Index Industries will keep you posted.

Thank You Zed254

Thanks for replying Guyfang; I will check this weekend for the idiot lights. The unit is new to me since day one when I crank it up before changing the S-1 switch had no power to the panel and yes hold the switch to start and starts up nicely release and it quit. That's why I replaces S-1...

Hello Light in the Dark; Thank you for replying I've spent all Sunday afternoon with the switch checking the wiring diagram but I did find that the thermostatic switch #32 was broken don't know if that might be a clue is a 2-wire connection mounted on the left side thermostat housing looking...

Thank you Guyfang

Hello folks I'm new at this forum need to see if I can get some technical assistance. Last May of 2019 I purchased an MEP804-a through Iron Planet picked it up in PA. I changed the oil filter put fresh oil, fuel filter, water separator filter and cleaned the fuel tank that had some slime at the...

Hello folks I'm new at this forum need to see if I can get some technical assistance. Last May of 2019 I purchased an MEP804-a through Iron Planet picked it up in PA. I changed the oil filter put fresh oil, fuel filter, water separator filter and cleaned the fuel tank that had some slime at the...