Recent content by xenocath

Check out jh diesels youtube channel he stuck that snorkel on a na 6.2 m1028 and swamped it.

I installed a Stebel Nautilus Compact Motorcycle Air Horn few years ago cause my daughter said for such a big truck the horn was kinda wimpy this one put a smile on her face so much so that all my current vehicles have one hope this helps.

I have followed a few offroad recovery crews on you tube for the last three years. they use these winches. They rarely use them as you are supposed to and they seem to take the beating and keep on working. I have one and have had no complaints.

I have installed the b&w hitch in my truck. Get replacement bed bolts before install and holes must be drilled to install

i made mine a manual switch also, rather have manual control anyhow.

Have you changed the fuel filter? mine had been slow starting lately. doing that fixed mine.

you need the adapter for the 84 model truck and right signal has to be wired in

i installed the aux tank a few years ago from my old 81 chevrolet 3/4ton as well as the wiring,switch and valve. no issues since 81 on the first truck it was in and none in the cucv since.

i installed one years ago. i like the light it gives that area, cb stuff and 12 volt plug are there.

just tuck the bottom i have had mine for 5 years and never came loose doing that.

the way it is wired has been working for a long time. it is now acting exactly like the card has failed and is not operating the relay as it used to so maybe something burnt on card circuitry or crossed up frankly the cards are the weak link in that system. if it is crossed up somewhere removing...

usmcpatriot remove the glow plug card, operate system as you always have, report back or bring it by the house and i'll take a look at it. I had a similar issue when my card went. I removed card and all was fine, since you have a manual glow plug push button, the only thing you will lose is...

These old trucks do just fine. This m1008 still works for a living.

self tappers will penetrate the bumper and there should be an adapter for your wiring for four way flat trailer connection and you would need to add the brake/ aux power wires yourself as well as a 7 way rv style plug if needed.

:???: