• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. xenocath

    ARB Snorkel Warning!

    Check out jh diesels youtube channel he stuck that snorkel on a na 6.2 m1028 and swamped it.
  2. xenocath

    Talk to me about horns

    I installed a Stebel Nautilus Compact Motorcycle Air Horn few years ago cause my daughter said for such a big truck the horn was kinda wimpy this one put a smile on her face so much so that all my current vehicles have one hope this helps.
  3. xenocath

    Harbor Freight Winch questions

    I have followed a few offroad recovery crews on you tube for the last three years. they use these winches. They rarely use them as you are supposed to and they seem to take the beating and keep on working. I have one and have had no complaints.
  4. xenocath

    M1008 gooseneck

    I have installed the b&w hitch in my truck. Get replacement bed bolts before install and holes must be drilled to install
  5. xenocath

    High idle solenoid acting up?

    i made mine a manual switch also, rather have manual control anyhow.
  6. xenocath

    Hard cold starts in hot weather.

    Have you changed the fuel filter? mine had been slow starting lately. doing that fixed mine.
  7. xenocath

    Adapter for a 4 pin trailer harness?

    you need the adapter for the 84 model truck and right signal has to be wired in
  8. xenocath

    Switchless duel tanks on M1008

    i installed the aux tank a few years ago from my old 81 chevrolet 3/4ton as well as the wiring,switch and valve. no issues since 81 on the first truck it was in and none in the cucv since.
  9. xenocath

    Light for floor shift bezel

    i installed one years ago. i like the light it gives that area, cb stuff and 12 volt plug are there.
  10. xenocath

    Radiator Grill Cover

    just tuck the bottom i have had mine for 5 years and never came loose doing that.
  11. xenocath

    Voltmeter in Yellow

    the way it is wired has been working for a long time. it is now acting exactly like the card has failed and is not operating the relay as it used to so maybe something burnt on card circuitry or crossed up frankly the cards are the weak link in that system. if it is crossed up somewhere removing...
  12. xenocath

    Voltmeter in Yellow

    usmcpatriot remove the glow plug card, operate system as you always have, report back or bring it by the house and i'll take a look at it. I had a similar issue when my card went. I removed card and all was fine, since you have a manual glow plug push button, the only thing you will lose is...
  13. xenocath

    Upgrading a CUCV's max towing capacity?

    These old trucks do just fine. This m1008 still works for a living.
  14. xenocath

    Need Help with New CUCV-2 - Vehicle End Trailer Connector

    self tappers will penetrate the bumper and there should be an adapter for your wiring for four way flat trailer connection and you would need to add the brake/ aux power wires yourself as well as a 7 way rv style plug if needed.
  15. xenocath

    Thinking about Cab Marker Lights for M1009

    :???:
  16. xenocath

    Brake pedal issue

    steering is fine so far just the pedal issue atm
  17. xenocath

    Brake pedal issue

    lately I have been having a slight issue with my brake pedal, it randomly gets really stiff to depress while driving and will stay that way until I turn the truck off but then it goes back to normal and will stay that way until it randomly does it again. could be 100 miles down the road or two...
  18. xenocath

    M1008/28 bed bolts

    fyi the lmc bed bolt kit falls short on the 2 bolts going thru the entire frame and spring hanger they come barely flush not enough to get a nut on. just installed a gooseneck hitch in my truck making it necessary to remove bed bolts ordered kit from them and 6 out of 8 were fine used...
  19. xenocath

    Need Dimensions for CUCV cargo bed bows

    http://www.steelsoldiers.com/showthread.php?64817-m1008-cargo-cover&highlight=cargo+cover try this thread it has the measurements your after post#14
  20. xenocath

    Cab/Marker Lights

    no need to go to the trouble I have measurements for the locations to install the lights just wanted the install sheet and template since I have never seen it after tons of researching for it.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks