Recent content by xjoutsider

The welder currently does not have a plug on it. Thought about making a extension cord to hook in between the gen set and the welder. That would make this box work. But I am up to suggestions that are not going to cost me an arm and a leg

So I could use something Like this Reliance Controls 50 Amp Would it be ok if this box was mounted to the Trailer.

If i wanted to my MEP-002a tralier mounted genset for a 240 source for my welder. I would need wire that has 4 wire. one to L1 and one to L3 to create the 240 one to L0 for the netral and the last for the ground. I assume i need to drive a grounding rod. (not sure where to source) Can I...

Does any one have any good info on the Hobart 90G20P Gensets. They look intersting have 4 wheels on it.

Do I have to wire it up to a breaker or can i just wire directly to an outlet and plug in form there.

I am looking for a power Source for my Lincoln 180 Mig welder looking at the product information. It looks like it only Draw 20 amp at 230V. Will I be ok to run it off an MEP-002a it is rated to 24 amps from what have be anble to Find. I really new genertors in general.