Search results

Why dont you find a short box(6 foot) instead or a side step bed...

I believe I talked to you at the MTA meet at Sussex Fairgrounds in April, you mite want to come over to PA in Sept. to the Red Ball meet in Gilbert PA Its the last big meet of the season...

When I connected the 24 Volt lead from the truck, there was a click on the AMP and the PA fault light came on for a second, everything was turned off so that was a concern, we tested it using a dummy load, when it was keyed I didnt hear the RT give the tone like t does on the PRC-104 and after a...

Iam hoping that someone can help me out, Iam in search of the Inter-Connecting cable that goes from the Amplifier AM-6545A to the Coupler CU-2064 it would have a NSN # of 80063-A3210317-1, or a Part# of 755017B0791 and it is 5 ft. 0in. long, I have one but the U & V pins are broken off which...

Ive always parked at the bottom of the lot.....

Iam in need of a C-2299 Control/Re-Trans Box any of the people bringing Communication Gear if ya have one let me know your Location.... Thanks Scott

Well I know this mite be along shot, does anybody out there have a AM-6874 AMP/Coupler for the GRC-213 that they want to get rid of, send me a PM... Thanks AM-6874

I have gone through the list of all the radios mentioned, but I dont see the GRC-106 mentioned, great radio that can be found in working order, and their is plenty of troubleshooting fixs out there if it doesnt... Scott O&O

I checked on Jakes website its wrong the correct date is June 24&25th.... Scott O&O

Does it have a Data plate i should be on there, usually located to the left of the steering wheel on the dash.... Scott O&O

Well thats a SINCGARS mount a RT-524 wont fit and no there is not an adapter, you need a MT-1029 Mount.. Scott O&O

Ill be there Thursday till the Sat. Spaces D-1, D-2 if anyone is interested in a 100 Amp system for there M151A1/A2 Ill bring it along... O&O Scott

Hey Neighbor, Say'en hey from Allentown ...

Jakes is Saturday May 7th 2016

Just now looking at Papabears Gun Truck if you would raise the sides sum and make some Hard doors you would have a armored Gun M151A1...

Well my 1966 Ford made M151A1 is serial #2M 9832 so I would think it would be somewhere around there... Scott O&O

Bernie it would help us if you could narrow it down a bit, is it a straight M151 or a M151A1 it would have a tag at the top middle of the engine bay fire wall, or a M151A2 that would have the tag by the trans tunnel, driver side foot well... O&O Scott

If you sent a email to G838.com you won't get an answer, the email address is G838.org

If you want to check it before you install it go over to the G838.org page type in coil on the search and it will give you the voltages range that you should have I've had them already getting them from a dealer who has been around for a very long time and the top fell off...

The Pulley's for a 60AMP have three grooves and you have to change the timing pointer you can find the procedure in -20 manual, they just had a very good thread on doing that over at G838.org... O&O Scott