Search results

You will see this real soon but no 4 doors.

Very pleased with the work done for me on the outriggers and substructure.

Thank you for your interest. The space behind my cab is part of the plan to extend the cab.It worked out to be about 20" after everything else was fitted,just enough for some added leg room and some storage. The plan for the spare tire is to build a mount strong enough to mount it on top of the...

Some new pictures to look at. Getting outriggers built now.

Finally back at it again with help from friends.Getting a carriage built for the picker to mount on the frame.Have the wet kit also getting it installed and a manual pto kit.I tried my best to get a hot shift pto but northing fits in the space besides a manual shift. I have the doors and frames...

Sorry for such a lengthy absence. Building a new shop so was busy with concrete till the weather changed. My truck is out in the snow bank waiting for me to take it in and install the hydraulic wet kit and do some final adjustments.I will post anything new when I get it done.

This is my solution to the factory partially blocked air filter. Left the tab to direct air flow around a bit.

Here are some updated photos.The deck is all revamped and fitted to the truck and mounting completed.It has guides and bolts to the original 5th wheel brackets that the tree spade also connects to. The rear hitch is complete just have to wire the trailer plug.I will be installing LED trailer...

Some new pictures.Have a picker to install and have the deck near complete.

I didn't realize it is actually a C-12. Is that a good engine?

The 8.3 seems to run real nice and the Alison is nice. What would I gain do you think? Probably not mileage....

Just got my parts truck home.Now I have doors. Kinda eye balling the C-15 with a 13sp in it.

That's exactly what I was thinking only half as short but old school. If you can see the I beam frame its tapered toward the back and the headache rack is Vertical with the cab. Must be to give a trailer more room in rough terrain.

Just thought I would post some pictures of a used deck I just scored.It has a Big PTO winch that I can run on hydraulics,Gin Poles,A roller on the back and A flip fifth wheel. Its been sitting a while and everything is seized up but should come around with some heat.It will overhang about 1.5 ft...

Vent valve was all good and in place where it should be. Thanks for the idea though.

Found out what happened to my brakes.Thanks to a question from FastNova. I vaguely recall that the break lights were on so I decided to check out the Treadle Valve. I took the 3 bolts out of the bottom and dropped the guts out and cleaned everything up nice. There was steel shot in it from a...

Starting to install my used tree spade and make some money.

The alternator came from a jobber after market parts suppler(Bumper to Bumper) its a Dixie and should be available at most parts sources. The Amperage is 60A ten more than stock. You can fit almost any Delco in the same bracket right up to 100+ Amps. Thanks for the compliment she will be...

Air pressure was 120 psi.