Search results

I used the new wire ends on my m1008, most of my original ends were worn out and loose anyway. The ends work well, and I have been running the 60gs for two years with no problem. If you need to purchase the right size wire ends you can get them at any auto parts store.

I took the truck to an alignment shop. They said its time for a new steering gear box, that's what is causing it to pull to one side

I have a 1984 M1008. My drivers side front tire is wearing more on the outside tread. I had the truck aligned less than 1000 miles ago. I am not getting any death wobble and the steering feels tight. I have replaced everything in the steering but the king pin parts. Do you guys think that I need...

Especially with a boat behind the fifth wheel

There would still be a lot of stress on the roof when starting and stopping

I got one from Autozone for around $400. They are not cheap, but they do come with a lifetime warranty.

I really want to see how they built the 5th wheel hitch on the suburban. I wouldn't think the roof would be very strong on its own

I understand an M1009 would not work... let me re-phrase any of the pickup truck models of the CUCV would work.

i have an m1008 but any of the variants of the cucv would do.

i guess you can make anything work if you have to :)

Cucv gooseneck or fifth wheel pictures Does anyone have pictures of their cucv towing a goosenck trailer or a fifth wheel? I want to see what theses trucks can really do. Post pictures if you have them.

What size are the shackles that fit on the front and back of the M1008? Mine is missing them. Does anyone know a good place to get them online?

I ended up fixing my problem. I found at the spindle has a small groove worn in it from the axle seal. Which after reading many forums I found out this is a really common problem on 14 bolt rear ends. Offroaddesign.com has a seal to fix this particular problem. I ordered it and installed it, my...

I have a 1984 M1008. I just put a new axle seal in it because it has been leaking. There is nothing wrong with the new seal. My vent line is also clean and clear. The seal is still leaking. Does anyone know what else it might be? Has anyone had similar problems?

I already have one. It's way too high

Did you have to drill any holes when you installed it, or does it use the existing ones?

I guess I'll be getting a hitch then before I tow anything heavy.Biggestc69 do you have any picture of your hitch installed?

Mine is completely welded on

I have a 1984 M1008 with a receiver hitch mounted to the bottom of the bumper. I was wondering what other people have towed with a similar setup? Has the bumper bent or the hitch broken off? I have towed a jetski with mine but plan on towing more in the future. I don't want to start an argument...

Thanks for the replies guys! Maybe I will consider the upgrade sooner than later.