Search results

I also like the 8.3, but I'm looking into swapping the Allison with a Fuller 9,10,or 13speed. The additional gear ratios, and overdrive would make the truck nicer to drive on the hwy. The clutch linkage may get interesting (maybe hydraulic). I'm also concerned about how the transfer case...

Hi Everyone Two of these dropsides were in the bed of my 923 when I got it from G/L. They don't appear to belong to this type of bed, and I don't know if they are tailgates or sides. Width 91" Height 18" Fiberglass construction. I'll give these away on the Free section of the classifieds...

Welcome from Lebanon PA. You will have a second truck before long, and then a parts truck to keep the first two running... Hope you have a big driveway.

Hi Guys - I've been reading alot of posts about fuel problems on the suction side of the systems. Fuel starvation, low side leaks allowing air in fuel lines, etc seem to be a common headache on our trucks. One trick I have used is to install a short piece of clear vinyl tubing to use as a...

Bringing this back up with a modulator / upshift question. TM -24 pg5-392 shows "full throttle" shift points. My truck shifts a few hundred RPM early through each gear. Looks like this is an internal adjustment. I understand that the modulator changes shift pressure (softer at light...

Thought about flipping 180. Maybe ill just use the PC to upload. Last attempt. This one a rotated 180 in the iphone so the image is upside down. The second is right side up. Now it seems to be working. I give up....

Not sure why they are uploading upside down. Thumbnail shows up correct before i hit upload, but when they hit the server they're upside down. Any suggestions? Using an iphone.

Test

​test

Welcome from Lebanon PA

Hi Leggeman- I own a few of these trucks (Not for sale). You are welcome to look over and drive my M923A2 so you know what you're getting into before buying. Be warned, these trucks tend to multiply after your first purchase. I had both of my trucks shipped from GL New Castle DE. Once in a...

Its the pressure transducer for the STE/ICE diagnostic tool. It has no effect on engine function. Replace it with a brass pipe plug, the threads are NPT.

Hello Everyone I noticed my drive belt was not alligned and beginning to fray. The vibration damper/ harmonic balancer began to seperate at the rubber layer, and the outer section moved away from the engine a 1/4 inch. Replacing the balancer is an easy repair and does not require a puller to...