Search results

With what you have listed as your top 3 criteria I would wholeheartedly say do the conversion to the Delco SI alternator. Less expensive that the military unit, Much easier to get replacement if ever needed again as they are stocked in many parts houses and lastly they more reliable than the...

Moose, I posted to the other thread the Napa site's Bendix branded LQ2 valve. or you can get them on the big E site for much less.

No that is not the part you need. The part you need is a Bendix LQ2 from Napa or much much cheaper on the Big E site

Moose, Most likely the Q2 valve found on the plate that is in the center of the truck just below the front bumper

Moose, Do the Q2 valve as that is most likely your issue

The list is pretty good. Personally if your not over a couple of hundred miles wait to change your fluids till your home (of course check levels and if filthy change it before starting out) this way the exiting fluids can be thoroughly warmed up and circulated enough that you get a good...

The easiest thing to do is place your max bid your willing to pay for the item your wanting and then just wait and see if you win at the end of the auction. But if you want to play the bidding game it's really just about like a real auction. Once the item actually "opens" for "active" bidding...

Fixed air horn on the 925 and replaced the wiper blades and replaced a couple of light bulbs in turn signal & marker lights so they all work now!. It's just about ready to hit the state safety inspection so I can get it licensed for the road. Started and drove the 923 over to the station and...

Hello and Welcome from Utah.

Nicely done Alex :)

Nicely done TurboMustang

Mike I picked up the 3.5" ID air snorkel on the big E site and the 3.5"OD to 5"ID exhaust pipe adapter on Amazon Hope that helps ya

Grab all the TM's as the troubleshooting sections will help you narrow down the answers quickly. btw Welcome to the Big Green Addiction

Sounds like some fairly common issues. Glad your getting them addressed

I wanted it to go on the outside to eliminate puddling of water/snow. As for Height I will eventually cut off a few inches from the main pipe to bring the overall height down to the stock setup height. That Prefilter you picked up should flow much better than the stock Mushroom cap as well.

Not to worried as I have an air sock aka pre-filter that can be slipped over it... but if conditions really are that bad it's easy to turn it backwards or to the side. If the big OTR trucks can run them facing forwards without a sock and I have run them forwards on the tractors and such on our...

Well got couple of things accomplished over the weekend. Got the 923a2 "Beast" through it's annual state safety inspection with flying colors and the tech doing it went over it with a fine tooth comb. But I knew it would so it's ready for the road for another year of shows and what not :-)...

Thanks Bro. I'll arrange a time to come snag them before next weekend as that is when I will get a chance to work on the 925 again.

Not to worried about that as I have a sock that can go over it if worried about weather. and then it's always easy to point it backwards if over the top weather driving weather...

Well got a few thing accomplished today. Got the Beast through it's annual state safety inspection with flying colors and the tech doing it went over it with a fine tooth comb. But I knew it would so just finished paying my registration fees and it's ready for the road for another year. On...