• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. ironhorsethegeneral

    Might need help in albuquerque

    You want to make sure whatever end it came off line it up back the same. it may be 90 degrees out on both ends of the flanges.
  2. ironhorsethegeneral

    Might need help in albuquerque

    You want to make sure whatever end it came off line it up back the same. it may be 90 degrees out on both ends of the flanges.
  3. ironhorsethegeneral

    Might need help in albuquerque

    You want to make sure whatever end it came off line it up back the same. it may be 90 degrees out on both ends of the flanges.
  4. ironhorsethegeneral

    Might need help in albuquerque

    You want to make sure whatever end it came off line it up back the same. it may be 90 degrees out on both ends of the flanges.
  5. ironhorsethegeneral

    New member from Oklahoma

    RE: Re: RE: New member from Oklahoma welcome aboard
  6. ironhorsethegeneral

    Rear axle length

    That's why I get my daughter to do all the dirty work!!! :jumpin: rofl
  7. ironhorsethegeneral

    I got wood !!!!

    RE: Got wood about 2 1/2 to 3 cords roughly. We also filled our truck up with wood about a year ago and it is alot of wood. It gave us a stack pile of 32 feet long and 5 feet high. Still had some left over.
  8. ironhorsethegeneral

    GAMVPA Southeastern Fall Rally and Swap Meet Sept 19-20

    GA MVPA Raly Great pictures Cpt. Marion. We all had a great time.
  9. ironhorsethegeneral

    HELP WITH BODY WORK

    Looking for someone near Acworth, GA that has experience in body work and possible welding. One of my trucks needs the hinges on the cawling fixed the metal on the cab cawling needs new metal. I could use some help fixing this. PM me for more details. Lunch is included.
  10. ironhorsethegeneral

    Another new addition!

    My winch truck does the same like yours. Good bottom and mid range but upper is slower. Has a D turbo. This engine is a Continental multifuel but has a 2900 rpm redline. And yes it is correct for this engine. Also nice looking truck you have.
  11. ironhorsethegeneral

    Me Vs Windsor Township - Victory

    Would like to be there but live to far away. GOOD LUCK!!
  12. ironhorsethegeneral

    My herd of deuces.....

    We use them for parades and with our Georgia State Defense Force (volunteer military), shows and also give rides to people so that they can get hooked on the OD Iron.
  13. ironhorsethegeneral

    How are you storing your Deuces? (Plural)

    Ours are in the drive parked side by side.
  14. ironhorsethegeneral

    Me Vs Windsor Township - Victory

    GOOD LUCK!!
  15. ironhorsethegeneral

    Some New Deuce Owner Questions...

    You can not put the non directional 1100x20 tires as duals they will hit each other.
  16. ironhorsethegeneral

    hose and filter

    You may need to clean out the hole or remove the whole assembly and clean it that way. You may have something plugging the hole.
  17. ironhorsethegeneral

    1000 Mile Recovery

    nice looking truck
  18. ironhorsethegeneral

    Wheel hop

    sounds like alignment problem. too much tow end if on outer side. shocks do not cause this kind of problem. they just cause tires to go out of round and the truck will bounce a lot. remember front tires need rotating just like cars. good luck!!
  19. ironhorsethegeneral

    Grease packingin hub, good practice or waste of grease

    No you do not fill the void with grease. Grase bearings real good that is all you need.
  20. ironhorsethegeneral

    It is here at last!

    RE: nice I agree nice looking truck.
112,752members
166,280threads
2,342,039posts
979online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks