Search results

I have a T in one of the air lines that go to the parking brake. I don't think your truck is set up the same. But I'm sure there is an air line under the cab you could tap into.

Awesome . I hope it works out , it looks like a good truck. I need to get another air ride seat for the passenger side of my M923A2 so my wife can have the same ride as I do. But first I have to re-locate the batteries out of the cab. When I do I hope I can get a good deal on a seat from...

I have an Ensign series air ride seat made by National Seating in my M923A2, I love it. It is very comfortable , I would rather drive my 5 than my one ton Dodge or my wife's Volkswagen Jetta. The Jetta is the worst it kills my back, but it is a Diesel so it gets amazing fuel mileage. The last...

I had a similar problem with mine, I could not get the idle speed below 1000 rpm. I had to unhooked the throttle linkage and the linkage that goes down to the transmission (shown in the picture) to set the idle speed. Then I had to adjust the linkage so it didn't change the idle speed when...

My truck was the same way , now I have to be careful in town it will get up to 35 or 40 miles per hour quick.

In the 5 Ton mods page search for "So-who-has-bumped-the-power-on-a-6CTA-cummins" it has a ton of information on the subject. I tried to post a direct link but it didn't work.

Awesome truck, I really like the look of this combination.

I'm not a wizard but an excavator module would be cool.

My crane swivel is just a big tube with a top welded on and then the crane body slides over the top. I did make a kind of T handled set screw thing that acts as a drag brake or can lock the crane at several different angles. If the truck is not level when using the crane you have to be careful...

I would like a full hydraulic crane but don't have the money for one. I built my bed crane from a 2000 lbs. engine hoist and some scrap steel I had laying around. It has a hand crank winch that is very slow but powerful, one day I will replace it with an electric winch. I can also hook my...

I would like to see a red neck swimming pool module with a water slide.

I like it, I may have to go this rout when I put a winch on my 5 ton.

I love it.

I'm still interested , I love your truck / trucks.

Nice truck. Air ride seats make a huge difference in ride quality. I don't know how I lived without them in my trucks.

I had a similar problem when I bought my M923A2. The bottom of the muffler was full of holes and the top seam was starting to rust through. When I poked a screwdriver into one of the bottom holes it opened up to be about three inches long and an inch wide. I looked for a replacement but I...

When I did my truck I had to adjust all the linkages and the bolt under the throttle pedal, it took a while but was well worth the time.

Another picture of the wood upright.

My 5 ton came with the bows and cargo cover but no troop seats or the metal uprights,just a mix of wood and fiberglass. The wood top piece(#3) measured 2 and 1/4 inch wide , 15/16 inch thick, and 75 and 1/2 inches long. This piece of wood is curved so if you made one out of a straight piece of...

The green thing looks like a RFID tag (radio frequency identification), military version of a tracking and information tag like items at Walmart.