Search results

It is amazing the answers come from just around the corner...hey Beast thanx..I intend to use them for display in a '55 M38a1 Air Force (Strata) if I ever get it done. It was a disaster but originally came from Wurtsmouth. I already have a PP-112. Got any idea for a near correct antenna or...

I would like to know the model designation, approximate years of use and applicaton of each of these: First, is a radio with frequency range of 200-280 Mhz on a rotating dial and presume it a ground vehicular to airborne variety. There is not a tag on it. Does this get power from a PP 109 or...

Photography is changing. The ease of digital is a blessing and a curse. From the days of the Civil War where an entire wagon was needed to haul plates and developing equipment to the combat photgraphers of WW1 with large box cameras and some early movies. Although this is site about MV's, the...

Some picts: United States Model 1918 U.S. 155mm "Schneider" Howitzer for sale

Mine runs fine with about 2 degrees. Stock carb stock engine. Make sure the vacume lines do not leak. There may be a sweet spot it likes run at, To much advance or retarded timing makes it knock and erratic idle. Table 13-1. Distributor Test Points Part number 3755201 Rotation . . . . . ...

Good time in O-HI-yeeeeehaaaa.. 700 miles in a M880.....priceless.....

My left brain is at it again.......... Findlay The Army and Navy will not be the same Air Force and Marine Corps are too in the game The junk they discard, give away, or sell Wind up in the hands of scroungers from h-ll The use for this stuff in dreams it may be It all winds up at Findlay...

http://www.steelsoldiers.com/deuce-modification-hot-rodding/42538-napa-muffler-will-really-quiet-truck-down.html

TheDieselPage.com - 6.5L Crankshaft Harmonic Damping - Fluidampr's Viscous Fluid Vibration Damper - Published September 2007

I used the remainder of a tube of sealant that I used to hold in automotive glass. It flexes, does not freeze, very sticky, and allows the steel on the hood to move with the temperature changes, and comes in black. Used on a 1009 and 880 with excellent results.

Interesting spot for the tool boxes.

Of the shelf at General Jim's.

Lonesome Recovery Blues The boys they think they’re goin on a trip Crates full of junk bought on a hot tip Belts and tools, filters and pumps Gimp’s special seat to smooth out the bumps Headlights, chains, air tools for repair Kip, are you sure we packed the spare? The...

Looks like a Bi-Centenial Michigan plate on the front from 1976. There were at least 3 AFB/ANG bases in Michigan in those days that do not exist now. Kinchloe, K.I. Sawyer, Wurtsmouth. All SAC bases I belive. "Of the nukes, we will neither confirm or deny."

Gillespie 383. After about a year the gloss fades. Very forgiving to apply. I used Rustolium Very Rusty Primer as a base coat. An attempt to d/a sand the old CARC brush marks out was slightly effective from 33 years of baking in the sun. But she is named Old Ugly anyway.

Some before and after.

As for transfering fuel from one tank to another, I suppose any 24 volt would work. The stock in tank pump is a bit like a mini sump pump and seems to move alot of fuel. Here is a thread on this type of discussion on the electric pump for replacement of the regular in tank pump from a few years...

A M880 painted with Gillespie 383 right after the mask was pulled. About a year later it dulled out nicely and the gloss went away even stored inside.

Some nice weather allowed the box, tailgate, fenders, window frame to get some paint. This truck was REALLY bad. But, I elected to repair and rebuild nearly all the body parts with patches and in some instances, a sledge hammer. I can be satisfied at least it was saved from the scrapper. It...

I fought this until I replaced the housing and filter. It can be drained regularly also as a bonus.