Search results

5 ton wheels are made from 3/8 thick steel, so 3/8 should be fine i have seen those modified hemmit wheels, they are nice, just a plate, but laser cutting was not close enough to get them where the guy wanted them, so he had scrapped the originals and made more plates with the laser, the plates...

muffler it....... dont worry

the deuce has a 6 bolt pattern, the hemmt wheels have a 10 bolt pattern, not interchangable, you either make 10 bolt hubs, or modify the wheels

you should get a 3rd battery, a car battery and add an alternator, the battery should not be connected in any way to the 2 batteries used for the trucks 24 volt system.......

Wolverine Technologies LLC, Home of the most advanced night operations gear in the world makes a kit, one is listed here, he sells them on ebay also, comes with the brackets, wiring, and alternator

be careful to make sure the convertor is seated in the front pump full before tightening things down, if not the pump rotor gets broken.......... before reassembly push in on the convertor while spinning it, you will feel it bottom out

good thread oldshep, keep us in the loop, it is always good to learn from someone else firsthand

nice

mine has been hard to start recently, i had to hold her half way to the floor and crank to get her to fire....... could be filters, they were recently changed........... no fuel leaks..... i guess i will check the filters

interesting

cool, i will go there

cabelas is a good chow hall..... close to me

mine has had some starting troubles lately, like it needs to have the pedal pushed halfway down before it fires up.... almost like it is not getting fuel....... this post may be helpful......

agreed

itar rules, you do not ship outside of the us any prior mil stuff, period, end of story, the feds are looking for people doing the same thing, and they do not play nice

they are out there for 20-30k

i would love them but the price is too high..... maybee 150 a set, if i blow too many of the 24 v bulbs i will swap in some 12 v bulbs in series that may work..or use my 12 v alternator to power a pair....

some kind of a lokcking hub?

i may need to get in touch with a utility company

wow, i was looking, but i will snag one sometime.... i need a good low priced truck.....