Search results

Nope, the OP did mean 6060 for a M1010 camper build. I am wanting to be able to do highway speeds and some off road but nothing hard....just don't want to get stuck. The truck has the TH400 in it now and will only do 55 mph without over revving the engine on the road. I do want to be able to...

What RPM are you running at 65 mph with your GV OD?

Mike, Do you know if the TCM is actually in the transmission of just connected to it in the 6L80-E....?

I'm in full agreement with you on the price. Sounds like you also have to be careful what transmission version you get plus need to be able to do programming after install. I don't know how to do that at this point but sure would like a 6 speed vs the 4 speed. I'm looking for a late model...

The 4.56 axles should work well with either a 6L80E or a TR6060 without the need to also change the axles. Yes, a bit faster on the high endwith the 4.10 but I think a top speed of 85-90 is plenty for a truck this size. If I just change the axles i'd be getting about 50 mph in top gear with...

Mike, I missed this on the first pass for some reason. The CUCV's are PASSENGER SIDE drop for the transfer case. I'm still looking for a better highway speed and think something in the .65-.63 range would be best. Are you having any luck with an OD transmission? My wife wants it to be an...

So, 2 more years gone by and no word on the truck! Is it complete, running?

I have pulled the ambulance beds, steel racks in front of the beds, diesel heater and rolling seat for medic. Probably too far to ship to CA but they are available. I am installing a second 20 gal fuel tank now and looking into OD options as 55 at red line is too slow.

I'm thinking I would have bought a gas truck if I wanted gas besides my engine only has 19K miles on it but I hear you. The LS would be quieter for sure.

Seems nothing is going to be cheap on this build. But then price a Mercedes 4x4 diesel camper. Very not cheap.

Thanks, very nice write up and lots of good info. I have a M1010 and plan on using the factory compressor mount for the cabin via either a chevy A/C from a donar vehicle or a vintage air. The VA looks nice. Do you like it and how it works? For the back I am going to pull the factory a/c and...

Have you completed this upgrade yet?

Is that an A/C system you have in your CUCV? If so, how does it work and who made it?

Have you got some pictures of your partial and completed walls and ceiling?

I agree its a good idea but that's a pretty pricey modification. Seems you could do it with $80-100 in parts DIY style. Is that a Hummer crossover in the pictures?

From what I have read, the 6L90E has a larger shaft then the 6L80E. The 6L80E has the 32 spline like the NP-208, NP-241 and NP-242 and I am sure you could convert the NP-205 to work also but a bit pricier. A newer, not sure of the years yet, with VSS output might be helpful for the electronic...

From what I have read on other sites the 6 bolt P side drop case will fit the 6L80 transmission. I think it said you need to be sure your case has a 32 spline input and may have to cut the shaft off some but was fairly easy to do. I'm still looking. The only other alternative I have found is...

Maybe a divorced transfer case would work. The truck is long enough for that I think....? The low first would make it easy to start out but I wonder if the power of the 6.2 would even push it on level road in 6th? I've only l run this engine with the TH-400 trans and it did fine in my M1009...

That OD would give me a 54 mph speed at 1800 rpm which is too slow for the highway. That's why I'm asking about 6 speeds. What about the 6L80E transmission?

Looking for a viable transmission for my M1010. Like the grunt of the 4.56 gears but need to do highway speeds also as I want to travel with Oliver. Has anyone put a TR-6060 in a CUCV yet? How does it do? Top speed? MPG?