Search results

Well, I was so proud of myself because I had demounted and remounted 5 of my duece tires. I was still alive and still had all my fingers and toes. :-D I'm in the process of going from 9 x 20 to 11 x 20. Then on number five I noticed that it was sure easy to just drop the tire with valve stem...

I haul a lot of youngsters in the back of my deuce, B-day parties, parades, & such. I always have adults in the back but I would like a little more safety. It seems the youngsters head sometimes barely reaches the bottom rung of the back support for the troop seats. Basically a large gap...

Just wondering if this thing would break-down duece tires? Thanks.

When bleeding your brakes with a pressure bleeder, "Do not push down on your brake pedal!" . It appears that if you have air in your lines and the pedal goes down too far, the pressure in the reservoir will push fluid in front of the piston and out of the front of the master cylinder on the...

I need a NAPA part number for a 180 degree thermostat for my duece. I have searched and found a link to a NAPA cross-reference, but it no longer works. I also found a thread that listed NAPA part# 258-185. People at NAPA said it wasn't listed. Anyone out there know a current part number...

I have collected almost all of my heater system. Just need a few small parts, any help is appricieated. :-D Mount for Heater on/off switch ( I have the switch) On/off plate for switch Wiring harness for heater with resistor & Y (I have the C/B) Would prefer NOS suff.

After several days of 20-30 degree weather, I went out to fire up one of my dueces. After warm up I was going to move it and the brake pedal went to the floor. Tried to pump it back up to pressure but never would. I looked at every wheel and all were dry, however fluid was coming out of the vent...

Well I was making some last minute checks lasts night on my duece before I depart this Friday on my first 200+ mile trip and I discovered an oil leak on one of my rear seals. :evil::evil: It was getting dark and cold and I wasn't looking forward to pulling off each tire and the hub to inspect...

My deuce currently has no tube on it and is making a mess on my starter and front axle. I did a search and saw that I need a 1 1/4" ID tube about 3' long and NAPA has them. My question is, what type of tube am I asking for? I'm expecting the usual questions that have no relevance to my...

I need a few parts to complete my coolant heater for my duece. My List: 1. Part# 19 & 20, Mount for hose coming in from scoop. 2. Part# 1, Mount for hose going into blower unit. 3. Any and all electrical parts. Switch, mount, harness, junction, ect. Thanks for any help or guidance.:-D

Well I was getting ready for my Halloween trail last night, which I was going to have my duece turn on its lights and blow the horn to scare the patrons. The wife thought the horn was a little too loud, so I packed a blanket in front of it. I hit the horn and it made a funny squeak and now...

Why is there a circuit breaker on the horn? Most of the circuits on the duece don't have any protection, why the horn? The reason I ask is, I want to include my duece in my annual Halloween Haunted Trail. I plan to have my 2 dueces, jeep, & trailers lined up with the trail between them, then...

I do not claim to be a “Fabricator” but here is how I mounted my tag to my deuce.  I found a lighted mount (12 volts), on-line at JC Whitneys (Part# ZX889627W) for $10.99 then used the “Resources” link for the light bulb conversion.   Went to NAPA and picked up a 24 volt bulb (464) to replace...

How come when I connect the "dogbone" between the two batteries there is a small arc? :shock: I thought I had some type of current draw or short somewhere but could find or hear nothing. I finally went to my second deuce and found that it does the same thing. It has set for days and the...

Well maybe not a Jump Seat. :D I am looking for some type of seat to go between the two 'springers" in my Deuce. I need something for the youngsters when momma is riding with me. It would be nice if it had a console for storage under it. Anyone know of something on the civilian market that...

Both of my M35A2Cs have a slight leak from this bolt. What is it for and more importantly what tool can I use to tighten it? A socket will not go on it because the socket walls are too thick. Injector lines are also in the way. Is there a special tool or trick? Thanks. PS: Sorry about...

Here are a few pictures of my trailer(M105A2) recovery from Tinker. I used my GMC Envoy and my friend (M1075) used his Miltary Blazer. The Envoy did well for the short run from Tinker to my house (Appx. 25 miles). We pulled these two home first, then I went back for my third one. :D

Anyone know if someone makes a cover for the back with no sides? I know I could roll the sides up but I would rather have a top with no sides. Also, want it to be military looking, not a blue tarp from Wal-Mart. I have to keep my passengers cool during the parade! :D Surely I'm not the...

When you lubricate the wheel bearings should you fill the void area in the hub between the bearings with grease as much as possible? My grandfather always did it that way and I never questioned the practice. There is no mention of this in the TMs that I have found, just pack the bearings and...

I'm going back together with one of my rear wheels and has I was looking at the the outer seal. I was expecting it to ride on the beveled surface of the hub, like a picture I had seen from another link. However, the OD of the seal is only large enough to ride on the outer surface of the...