Search results

Looks good. Hopefully that bad fuel pump doesn't turn into a bad injector pump.

The center pin on 1 spring sheared off and the middle leaf is working its way out if the spring pack. I could get by taking it all apart and replacing the center pin, bushings, and u bolts. I figure I might as well upgrade the springs while its apart. As far as the zero rates, I'm pretty sure in...

I'm thinking of installing a set of Tough Country 2" HD front springs (pn # 18217) to level my M1028. I'm just looking to get rid of the rake that these trucks seem to have. I searched through most of the lift kit post I found, but most of them were about bigger lifts to clear 37" tires. Im...

I have a M1028 that I drive daily in the nice weather. It's a clean truck from North Carolina. I also have a few rusty New England trucks that I keep around for parts.

Any chance that one of the locking hubs is sticking?. If you need to borrow a jack, I'm in Braintree.

I've been watching your new truck on craigslist for the last 2 years as well as seeing it in person. Its a clean truck, congratulations on your new toy.. How does it drive with the 3.73 gears Steve had installed?

I've been following your build, I like the idea. I didn't post because I don't have any experience with a swap like this. I would be interested to know the total cost involved and the mpg's of your truck when done. Good luck with it.

Looks real good. Is that the one that was just on craigslist in New Hampshire?

Here in Mass $2000 is a steal for a running & driving M1028 regardless of the rust. The axles alone sell for $1500 around here.

Looking forward to see how the install goes.

Welcome from Mass. I'm on the south shore. Is that the truck I spotted on craigslist?

I'm in southern mass if you get in a jam. Others have offered good advice so far, but how about your spare tire? Make sure it's not rusted in place. While your at it, check your lug wrench and jack.

DIRTY1, It was a pleasure doing business with you. I'm sure my old truck will serve you well. Sounds like it went to a good home. Fitz.

Dirty1. Welcome to the site. Was this the M1008 from Holbrook that was on CL?

Depends on where you live. In Mass I would gladly pay about 7k for a clean one.

Keep in mind you old radiator is worth good money at a recycling center. I just turned in a 4 core rad from a big block k30 and got $52 for it.

Blazers & suburbans up to 91 will have a pass side front driveshaft.

Sorry to hear About the problems with your truck. If offers from other members don't work out please call me at (781)223-0616. Im on here daily but rarely post because I type with 2 thumbs on my smart phone. I currently have 3 spare 6.2 j code motors from rotted out M1009'S and would love to...

A self tapping screw in the seep hole on the flex plate cover will buy you some time till you can fix it the right way.

I can't tell by the picture but is there any chance that hole is in the top of the axle?. If so that hole is for the vent tube.