Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks for your Service. Plenty of members in your area to help when you figure out what
you want. Whatever your choice is, remember you'll have to work on it, because there all older vehicles. The Deuce tool box is bigger.
I wouldn't. I think the multifuel will burn almost anything in an emergency, but I would only put Diesel or bio in it.
From the description you gave, I would think it would probably clog the filters and possibly ruin the IP or injectors.
I Haven't looked at his site recently, but someone posted Jatonka's site having
most of the TM's. If you don't find it there, PM me with the vehicle your trying to camo, I have a hard copy I can scan for you.
Yes, but they wouldn't equalize the charge as a 24v would. For the price of two twelve volt units, you should be able to
find something.
http://www.northerntool.com/shop/tools/product_200365179_200365179
Just realized how old this thread is, but I would've had a less informative response when you posted. Hope
my experiences help someone with the same question in the future.
I have a NOS canvas top I got from Saturn Surplus about 4-5 years ago. It stayed in the house for the first year and a half and and then sat in the garage a couple years before I put it on and put it in the weather. its been on the
the truck a little over a year and its...
Check the fuel itself. We got a golf cart in the shop today that had already been looked at by a few other shops.
Owner said it ran out of gas and they refilled it. It hasn't run since. Contaminated with water, runs fine with an alternate fuel tank.
I saw something on the play computer laptop at work a while ago. I think the antivirus was AVAST. I'll try to go n tommorrrow
and see if it happens again.
It's 1/2NPT. Mine was missing and I had to chase the threads. It now has a ball valve on it.
eventually I'll replace it with the original style valve that has the handle in the correct position.
First time non zipper so you can take it all apart and inspect it. After that first inspection I would probably go to zipper
and the time after that, back to the non zipper and tear it down. Ask when you order either one, where they're made.
I have to replace some already that only lasted a...
Camo, I thinks that's how they were originally issued. It's not that hard to do with the patterns, they were available her
one time. If you can't find them, I can scan and send you some. I did some M151's 20 yrs ago and it wasn't to hard. We
some with a touch-up gun and some with rattlecans.
This place seems to be like a marriage sometimes, You try to the best of your ability to find answer before asking, but sometimes you just want runaway and say screw it when get your replies. Like marriage it gets better with time if you have the patience and a sense of humor.