Search results

I was just happy to get the thing running again since I am just finishing up a resto on my nicer one shown here. I plan on a 480 trans swap and frame off resto on the one with tranny issues but I need to be able to move it around so hence I am super happy with the quick fix.

Just wanted to thank all who answered. I finally got the time to drop the pan, replaced filter and o-ring. The tranny pan fluid was glistening with metal sparkles, a little smattering of tiny metal fragments it the pan too. I added 7 quarts DEX3 and fired it up..... worked good as new again! I...

Thanks so much, guys. I have a filter on order will see what’s in the pan once it gets here. I’ll follow up with results....

It's full when running, if anything slightly overfull. Nice pinkish red color.... My brother in law the mechanic says he will test the pressures says it looks like some type of "apply" issue. He has never worked on a HMMWV but says the th400 is simple and easy. My next plan is to download the TM...

So sorry, I have the old school 3 speed. TH400 I believe.... I'll edit above.

I searched the forum, got some good reading in but have a strange symptom with the trans and truck is disabled. I have the old school 3 speed 3L80.I will do some troubleshooting but maybe someone can narrow down my search. I was driving the truck and it started slowing while the rpm's...

Good question! No, just the handle itself.....

So I am wondering if the replacement of a new parking brake is an easy bolt off and on proposition or is it a pita? I have the old style and it is a little beat without the safety release button. I would like to slap a new one in, but I already have plenty of projects on this thing that will...

Thank you, sir.... I might very well buy that one. I already have a NOS offset one for the tow but want the other. I live 30 minutes from there in fact. One thing I noticed is that it is now $199 though, it must have inflated recently!

excellent!!!! I made copies of the 20-3, but really wondered about the bolt types etc since I am using all new hardware. Man that will save me some time!

I have 2 weapons mount, I’ll take photos tomorrow...sending pm

Excellent, thanks! I need to just start the assembly then things should be obvious.

Quick view of coupla parts if it helps.

Man, that is exactly the kind of advice I am looking for! I have to get the turret installed then start dragging and assembling the coupla to see if it will mount. It’s heavy but in pieces. I thought the turret hatch would be a problem but maybe at least the coupla will mount to the old style...

I want to mount a coupla to the turret I still need to install. I think I have most of the parts, but will see as I go. I downloaded all the TM's I can find to get the turret installed, but not sure how the coupla mounts to the turret. I have the older style hatch with the two appendages...

Thanks guys! yeah, looks like I cant push it far enough back to have it aft of pipe. I have the pipe in a box in attic, but I suppose I will dig it out and measure to be sure. Action, by your measurements it looks like it might work, but I see what you are saying about the screen rounding out...

I have a deep water fording kit and want to install vent louvers on my left slant back sponson. I wont get to the exhaust for a bit, but it looks like I might have to mount the louvers far enough forward that they may run underneath the pipe. The louvers stick out a bit less than an inch from...

Gotcha, edited location. I have had a few 5 tons in AZ, had to get rid of them due to space at new house... bought the HMMWV's because smaller. Everything I want to do to the slant will be bone stock. I suppose somewhere in between. I'm not looking for a museum resto, but everything I put on...

Hello, I have 2 HMMWV's I would like to restore. Both won't take too much to do, and I have gotten most of the parts I need. I have done some work myself but have time constraints with work and sometimes need extra help. I am brand new to the area so no real contacts yet. My next project is to...

Excellent, thanks so much!