Search results

It worked..tranny tip inside I am pulling my tranny in my 1009 tomorrow. The flywheel has a bald spot. My plan is to put longer bolts in the bottom 2 holes , and with a transmission jack, slide the tranny straight back enough to remove the flywheel while the tranny stays lined up. I am at work...

I had a starter go out on my 1009, could not find a locally available 24 volt starter. I decided to go 12 volt to make my vehicle a little more common on parts availability.I am almost finished with the project, waiting to pick up my new cables.My question is this: I am an anti-clutter freak...

I have been having hard start issues when cold. When it does start it runs real rough until it warms. The glow plug circuit was cycling, can hear the solenoid click, and the voltage drops while it clicks. I put a set of new AC delco glow plugs in, and wired the solenoid off the front battery's +...

I want to order some injectors for my 1984 1009, the seller asked for my injector #, I got this off the old injectors and he said the # doesn't mean anything to him? "BKCA 18S48 BJG CAV" Anybody recognize this injector, is it long / short , coarse / fine?

I went and test drove a deuce today. A M35a2 cont. engine, the body is ready to fall off the frame(rust) , the brakes took 4 good pumps to slow it down from 25 mph on a dirt road (was scared to go any faster with no brakes). To say the least this vehicle seemed worn out, and ready to collapse. I...

I currently own a m1009 cucv, and have not been having good luck on alternative fuel (WMO). I have a gentleman wanting to trade me a 1971 M35A2 (WOW, now that is a real MV) with the continental multi fuel ( he claims ), it has the winch, a homemade flatbed, and some rust. Are these things truly...

My cucv puts out blue smoke on straight diesel and black smoke on a 75/25 diesel/wmo mix. It also idles a little rough when cold on both fuels, almost like a miss. Any ideas? The smoke seems a bit excessive, and it did not use to do it as bad. I am wondering about my injectors?

My 1009 is starting fine, idling fine, but on the pedal produces alot of black smoke, and not much power. So far: new air filter, cdr valve was replaced approx. 1500 miles back, thought it was the fuel filter so I changed to a spin on unit from a civilian 6.2 truck. Cleaned the fuel return...

I tried to search for the answer, but no luck, so..... I want to control my glow plugs manually , no automatic function at all. Do I just cut the light blue wire at the controller and wire it to a grounding momentary switch, or do I need to do something else to prevent the system from...

I am wanting to pull the trigger on a 1009 ( would be my first mv). The main reason (besides it is a way cool suv), is to burn WMO. I did a search on 1009's on wmo, but the threads seem to get hijacked by all the big truck owners with multi fuel engines. I really need to hear from 1008 & 1009...

I am new to this site & mv's . I was thinking about a 1009 6.2 automatic that has 65k, no leaks.Seems to run well, military put a new tranny in in 2007, came from a N.C. guard post. I can't find any rust. The current owner states that he has put new batteries, alternators , and a few other...