Search results

Ive done several vintage air kits on 67-72 Chevy's very straight forward just takes some time. looking at my m1008 there is a lot less room under the hood but should be very little difference other than the extra alternator in the way.

looks good whats the plan for the box it would make a sweet enclosed trailer.

Thanks

37 12.50 16.5 radial trxus Mt's 10 ply

I understand what you are saying my Friend but this truck is going to be a custom rig no concern at all for originality. If the truck had been in better shape i would have keep it original but the only good panels on this truck was the passenger, fender door and bed side I'm going...

Thanks i searched on delco remy web site but never thought to try a regular web search.

pics of the starter

31s will fit but Thea are shorter than the stock 235-85-16 around 31.5

on the original mileage i would look at the wear on the steering wheel and the shifter nob Thea should have a textured pattern at 7k miles be worn slick almost shinny at 107k great find buy the way ill be looking for a m1009 for a dd soon myself

I hadn't thought about parallel wiring the alts thats a good idea. Thanks i went out and pulled the starter the part numbers on it are 1998367 5j 20 with delco Remy USA under it then on the other side hd 1227 49 the last digit 9 I'm assuming it was hard to make out Thanks for...

Thanks I turn wrenches on antiques and hot rods for a living so 25 years old doesn't bother me. :mrgreen: To me it does seem to be spinning fast but this is my first cucv Ive had several civy version in the last 24 years. what I'm wanting to know is there any way to identify my starter?

I'm hoping all i need is a solenoid don't wont to drop that much coin for no reason the starter works fine. If it turns out to be a 12v i could do the 12v conversion. if i knew what starter was on it originally i would not have needed to make this post. the Parts replacer wasn't even sure.

I bought my m1008 at a used car lot. Thea could not get it to start for me to take a test drive so there parts replacer.(i wont call him a mechanic) Had taken the starter off and was trying some he picked up in there junkyard (no military vehicles there i checked) and a solenoid he had new in...

mine are 4 in backspacing pressed centers loads of room.

If it wont fit between the finders forward you can back it on my m1008 was 78.5'' in the rear.

Whats up!

Thea are 12.50's but look more like an 11.50 i like a narrow tire though the more i can keep in the fender the better.

Radial 10 ply not got to try them out yet Ive only got one fender cut still need to cut the other side and the bed.

Just starting my build. 37 in interco truxus mt (37.5 in mounted) on humvee 8 bolt wheels. First finder cut no lift no inner fender soon to be 52 in front springs.

I'm going to use these on mine minus the perches when i get new leaf springs i think Thea give a discount(25-30) for leaving the perches out of the kit. Ive bought several parts from them great company to deal with. 14 Bolt Axle Swap Combo Barnes4WD.com - Off Road Fabrication Parts