Search results

hit it with a power washer or a scrub brush

Pics?

sometimes they get extremely stuck. but if that press doesent want to push it out hitting the knuckle while the press is tight on the joint will cause it to pop out fast and easy.

I havent replaced the ball joints on my humvee yet. but I have replaced plenty of them on various cars and trucks back when I worked in a shop. go pick up one of these ball joint presses harborfreight sells them if you cant find it elsewhere. if you get one and since you have a stubborn...

cool looks interesting. does it have doors in the rear?

are you sure those will hold the door closed real good? i can see them popping open especially with repeated closings the wire striker may start to bend

sounds cool post up a pic

You sure the loud roaring and howling was not the fan coming on?

I always let it warm up for afew at least till the temp is abt 120 from a cold start if it's warm outside. even longer when it's cold outside. They always seem happier when warm

Hard door hinge PN EC12339448-1 and EC12339448-2 Get em from macmotors. get ur latches here http://www.eberhard.com/products/paddle-latches/249-250-series/19683 beats prices of all the other outfits and Epay

I was looking at this but its to big to sit nicely on the radio table and I really wanted this but I couldent justify the $500+ price . So I figured I could make something that would work. I made it easily removable too so I can throw it in anything that needs tunes in it.

I made a new sound system out of 6 inch pvc pipe and used a swiveling marine grade radio housing to house the radio. its really **** loud I can actually hear it over the truck going 60mph :cool: .

have you seen this one? http://shop.pkys.com/Victron-Energy-Orion-2412-40-DC-DC-Converter-with-40-Amp-Output_p_2766.html?gclid=CjwKCAjwqcHLBRAqEiwA-j4AyIKSrxZMjsI8Mk27820SWxM-Y0PRBh17vYqtgwroj_HJLO4GQS8ZrxoCjOAQAvD_BwE

Found this 24 to 12 volt phone charger accessory box with the converter built into it. I ordered one figured I would post a link http://www.kencofire.com/ab224vodcto11.html

My steering wheel has a inch or 2 of wiggle while the truck is off.and it does drive smooth and straight as a arrow I can let go of the wheel at 60mph and it stays straight. I dont to much trust what "shops" say they always try to scare people into buying things. once when I took my beater car...

I dont mean any negativity towards the OP with his purchase, but I dont respect plan B supply because they go through great lengths to not disclose to buyers that they get the trucks off of govplanet with the same off road stipulations and they just work their way around "off road only"...

nsn 5340-01-255-9919

kcobean thanks for the update glad you finally got the truck. Thats some BS about the batteries and wipers and fuel tank though.

probably indicating the spindle nut was checked. I know alot of them have initials on the cover from when they where in service so the unit would know who to crucify should the wheel fall off

You get your rig yet?