Search results

painted my front reciever [IMG]http://uploads.tapatalk-cdn.com/20160226/9f3a967b573c31448c2b8034505e7498.jpg[/[IMG]

Sounds like it'll be a cool build. Wish I had as many cucv as you. I can't even find any for sale here

removed this for room where it's going on Measuring for shocks earning it's keep led bar and pods mounted on the front. Cut up the stock turns to mount the pods. I'm going to do the turns different.

Front driveshaft in, not sure I'm happy with it. finished the body lift adjusted the shifter linkage put the lights back in. Burnt some of the new header paint off ( it shook the walls with no exhaust on it) This is it beside a suburban with a 4" lift grille is staying out for now because I'm...

I tuck 36s on stock suspension.

Deleted this crap In favor of this Half the exhaust out Rims and tires on shackle angle (very happy with it Ran a new passenger side front hard brake line and a reward rear hard brake line, then worked for an hour or more on bleeding the brakes still nowhere near where I want them but I...

rachet strap till I can get a new one other side with u bolts all torqued and good to go didn't like the shackle angle so I moved the front spring eye forward on hole in the b52s. Thinking im going to have to get a new front driveshaft made but we'll see. Got a new u bolt and got that buttoned...

Went into town yesterday got new oil filter (I crushed the old one removing the old headers). New plugs a bunch of various bolts for it. Today I put new energy suspension bushings in the springs and hung them Put in the plugs and am going to have to do somthing about this one new wix oil...

Flatbed is starting to get full of old parts Ordered 2 inch body lift pucks for it. Headers needed to be clearance for the water temp sensor Got um on little shorter than my old ones so I'll have to redo the exhaust tried my hand at clearancing the drive shaft. Before after b-52...

paint ]putting my leaves together with my fancy new UHMW zero rate on paint welded these clamps on Old pitman arm off the 2wd steering box What ended up left of the headers Pulled the driveshaft out to get these cut off

front leaves brackets shackles and body mounts off. Girly friend help in clean up the 60 As clean as its getting Primer first couple coats frame cleanedprimer

Got about 6"s Started on the front Bye tires Bye bumper Bye 60 Bye sway bar Had to use the hi lift to get the body off the mounts

New shackle on zero rates in moved the axle back 1.5 inches you can really see how much it moved it back here shackle bolted up exhaust brackets and shocks off all done

Ordered uhmw for inbetween the leaves Shackle flip B-52 kit and shackles Zero rates started tearing into the rear. Tires off Cut the old shackles off big pita cleaned up the frame

Installed ordered a winch received new headers needed lift so I decided instead of just bolting on some generic lift kit I would get somthing that would actually do more more than just be able to fit big tires like flex etc. So I decided to go with a diy4x b-52 kit to 52" swap and a zero...

bought this

last stuck. This one truck got messed up pretty good. Slid in and landed on my side I drove back and forth for a couple minutes laying on my side till I finally popped up and out and high centered. Pretty well destroyed the box and drivers door grenaded the steering gear box and ruined the...

I wish it'd make things alot easier haha