• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    M936 Wrecker Hydraulic Hoist Motor

    Wow. This should be sticked or something. Why? Because I think it just saved my butt! Lemme 'splain..... I drove my new to me M936A2 across the country to home and stopped at family Thanksgiving on the way. I was letting the kids play with the crane and noted hydraulic fluid leaking out the...
  2. K

    Bringing My MV Home

    Well alright sorry for the late update once I got back on home turf I just needed to unwind a bit. I made it about 2,400 miles in 5 days with one airline break/repair, a new fiberglass hard top installed, and some important lessons for cold weather (as well as an opportunity to test the ether...
  3. K

    Bringing My MV Home

    Haha I figured it out needed to rev the motor more! Also finally got the horn working sure could have used that on the trip oh well. Taking the kids out to do stuff like get doughnuts. Good times!
  4. K

    Bringing My MV Home

    Thanks. Absolute you can feel it hit the stop. So after dark I skimmed through all 489 pages of the TM and am still at a loss how to unpin it. Seems a great thing to have. Any hints on where it's located?
  5. K

    Bringing My MV Home

    Alright! Made it to Atascadero for family turkey day. Now for a couple days rest and getting the nieces and nephews to play with the crane. Only 150 miles to home and after 2370 miles in 5 days I think I'll be fine. Quick question for those who operate wreckers: I played with for the first time...
  6. K

    Bringing My MV Home

    Whew! Just thought I'd post an update real quick before taking some sleep. Started in Ogden got my hard top looks great. Got out of there about noon. Stopped about 30 miles shy of Barstow. 280 miles to Atascadero for family turkey day. From there on I'm on home ground. Truck is running great I...
  7. K

    Bringing My MV Home

    Thanks Randy! Pretty sure I'll be rolling through there but not sure about time available or when. Depends on what's up with my hard top tomorrow, how long it'll take to install, how much drive time I get. I'm running from Ogden to Atascadero and Vegas is halfway. Keeping it loose.... If you...
  8. K

    Bringing My MV Home

    Ha my mileage count was off stupid fat fingers and cel phones. I'm a full keyboard kinda guy. Text to speech still not there yet. It was 1,518 miles start to pit stop in about 50 hours. One roadside repair. Lots and lots of stops and brief walk around to stretch. Mileage is between 6 and 6.5...
  9. K

    Bringing My MV Home

    Whoa! Ok. Old spec was 80, then the TM changed to 90. So old spec was better? Sounds like 75 dead cold cold cold. Probably hit 85 maybe 90 hot rule of thumb is 10 percent cold to hot. Going to try this first thing tomorrow and keep careful eye on the tires. Hey maybe it'll ride better too!
  10. K

    Bringing My MV Home

    Yep. Lesson learned. I was pretty worried about the batteries. Another thing about cold weather: tire pressure. Every morning I do my checks and this morning set all tires at 90 per spec but it was stupid cold. Got 50 Mike's down the road and checked hot they were at 110. So I let them back down...
  11. K

    Bringing My MV Home

    Just kept going yesterday. Slept in the cab at a truck stop again. So cold it killed my cel phone and I had to use the ether start. 1316 miles in two days!!! I feel pretty beat at this point. Late start and roadside repairs in there. The reward is less than 250 miles today. Going to treat myself...
  12. K

    Bringing My MV Home

    Greetings from Nebraska! Lost a wet tank air line and hung it up at 0300. Got 5 little winks, made friends, made repairs, back on the road! There's more to the story I'll post when I get home. Shooting for 500 a day in one of these is a chore! Did just over that between 1300 and 0100 yesterday...
  13. K

    WRECKER AIR VALVE 936a2

    I would be inclined to stick a gauge on the system and see what the static hydraulic pressure is. I have no idea what the spec is. I've chased my tail on systems because of a piece of junk stuck in a relief valve. Besides that it's good to have a test point for adjustments. If you do find a...
  14. K

    Bringing My MV Home

    Gentlemen thank you for the input. Very helpful. Flying day today all day. Pickup tomorrow. Will try to post from the road!
  15. K

    LED Headlight

    On the list for sure. Good lights have been some of the best investments I've made in any vehicle. Thanks for posting.
  16. K

    Opening the hood

    Well when you do come up with something please share. At 5'11" and 135# I can use all the help I can get! Low mass guy in a high leverage world......
  17. K

    Bringing My MV Home

    I'd like to stay off the interstate but I don't think that's an option this trip. I'm just going to have to poke along in the slow lane. I've done the LAB2V a few times and taken the bailouts along I10 it can't be worse than having a semi blow past you at 75mph on a 300# dirt bike doing 50mph...
  18. K

    Bringing My MV Home

    Wow thanks for the replies! It's good to hear folks have done this without too much issue. Going through the threads the stories are all over the place. The truck is basically as bought reworked. Has 2k miles and 700 of that was the old owner driving it home. It's been stored inside, never...
  19. K

    Bringing My MV Home

    Well I was going to ship my new purchase but then I found myself in a place to burn some vacation time so decided to drive it and save a pile of dough (maybe). I bought a mint condition M936A2 and will be putting more miles coming home than it has on the clock but hey; what's the fun in keeping...
  20. K

    California members

    New MV owner in Felton, CA here.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks