Search results

I have run the test on the wiring harness for the gp card and need some help. The test is the one on page 2-63 in TM 9-2320-289-20. The first test says that the purple wire shoul have about 12 volts in the start position, if not correct trace the circuit. I only get between 8-9 volts. Is this...

guess i will just watch for one. ive already gone throuh the winter without one. its done fine

wow kinda expensive! Thanks for the numbers

can anyone help me with the voltage problem?

The temp switch in the head

The sender seems to be ok. I do start the truck with the pedal to the floor so the plunger should come out. I also have tried to adjust it and still dosent do anything.

Tried the ground but that didn't work. Guess its a bad soleniod. Can you buy these at napa? Where can I get one?

I ran the test you said to do before installing the new card. Looks like the gp switch is bad and also the purple wire should have 12v but only has 8-9v. Anyone know what this means?

I won an nos one on ebay. Hopefully it works. Thanks

where do you get a new solenoid for these? Can you get one at napa? Anyone have the part number?

OK now I have power at the selnoid but still nothing. Help please

Looks good John! I bought one when you had the convention in Mobile.

Thanks Mark I'll try that.

No one has said if there is something I should look for to be wrong before I put in a new card. Any sugestions from anyone or just try a different card. Thanks for the help.

What should I look for to be wrong? I looked at the TM but I'm not that great with electric. Can anyone tell me what I should look for that may be malfunctioning?

No not in a big hurry. Just would like to get it rebuilt and back on the truck and ready to go when the nice weather gets here. Let me know what you have to have for it.

I am trying to rebuild my airpack on my 211 but the can is shot. Does anyone have an old airpack they are willing to sell or even just the can?

Thats what I've been tring to find out. Dosen't reallly look like anynoe sells these cards.

Is there anything I would need to check to prevent it from happining again. Or was it the cards time to go.

There may be a thread on this already but couldn't find what I wanted. The GP controller card in my M1009 burnt this weekend and I'm looking for another does anyone know where to get one. I would like to keep the system stock and perfer not to install a push button. Can anyone help?