Search results

What the ..... I only get about every other word:lost:

Is that zombie #1's foot in pics 4 and 5?

Bump!

I just went though my brake system and replace all lines, steel and rubber. The main lines i.e from the master cylinder to the airpack out to the splitter behind the spare tire then out to the rubber lines to the axles. All 5/16, the lines across the axles 1/4.

Could you here this sound all the time? or just when the truck was at idle.. the reason I'm asking is because I test drove a m1009 the other day and at idle it made a sound similar to the one you are describing, however as soon as I increased the rpm's slightly the noise went away, I though it...

you said you could hear it ,, i know its hard to describe a sound but is it a kind of high pitch rattling sound? i looked a m1009 the other day and it ran good but at idle it had that rattle sounded sorta like the exhaust but everthing was tight.

Does anyone sell a 24volt battery pack? Similar to the 12v ones used for civi cars a trucks.

I got mine from a friend who had a o-ring kit ( a big red box full of a variety of o-rings) he got from the local parts store .. I think mine went bad shortly after using biodiesel...

Listen to this man I had exactly the same problem and it was the o'ring on the shaft .. its about a 3/8 or so o-ring i had almost 5 gallon of fuel in my oil.. my fdc is not bypassed .. do yourself a favor and MOVE YOUR HEATER befor you start .. its a 20 min fix.. good luck.

Last srping there was a Military appreciation day and motorcycle cruise-in at Pioneer Park on Rt 17 in Covington Ky. Does anyone out there have any information on this? I searched the net but came up empty. Last year the local national gaurd landed a chopper in the ball field and let the kids...

count me in I've been dieing to get the truck out for something like this! Hey doc junkyard and gimp we could all meat somewhere and convoy up!

are bobbers welcome? or are there to many purists gonna be there

welcome I up here in independence. bobbed m35 seeya around

thanks for the clarification

it looks a though the wheel is covering the holes for the studs?

was that a metal folding chair under the tire in the third picture?

try bds lifts.. they have a great reputation and a no questions asked full lifetime warranty.. even if you put you truck in a ditch and tell them it was your fault, they will replace the parts for free.

how much did it run for a drum? i want to do my truck.. does it cut through as good as silica sand

nopics

no i did not have to do anything special. just told the guy i wanted historic plates, he said ok it took less than five minutes. There are restrictions, no commercial use, "historic vehicle" shall mean all motor vehicles twenty-five (25) years old or older, which are used primarily for...