Search results

Nothing cool was ever easy i like a challenge and building and customizing things is my never ending hobby. I am never finished with anything i build nor am i happy with a factory vehicle i just have to cut chop to make it better.

I would consider something from a crane carrier corp truck similar cabover setup

I would check to see if there is power to the switch, then check to see if said power is getting through the switch, then I would check to see if the power is making it to the fan and also make sure it has a good ground if all this in order the fan might be bad.

Great build gonna go the same way and build my own if I can't find one.

I am kind of jealous been wanting snow. Been just a little cool here in minnesota

I took 1/2" commerical rubber floor mats with a dimond tread pattern for shop floors and took some measurements of each side cut it to fit and dropped them in. Granted it two pieces and does not go from side to side but it help insulate and provide traction for getting in and out and I think...

I woud not give more than 2000 for it current condition

I also had something similar happen to me turned out to be the fuel shutoff solennoid granted this was on an A3

I have done alot of searching and can never seem to find one. And unfortunitly I am single and I do not have any kids to give away. :lol:

I have noticed that a few members have or at least one seems to own a HEMTT and was wondering where I might be able to get one. :driver:

Is your truck at Scotts place some of the stuff in the photos looks familiar

Maybe you could get another member from a different state to title it and you just simply transfer it to yourself.

Welcome to SS from minnesota.

Definitely try state farm I am from mn and I have my a3 insured with them. It is insured commerical for non commerical use.

With my setup I have sattelite radio and I don't I have to worry about Batteries going dead on me I tried doing that when I first bought my mv batteries where always going dead, thisv other way I about 200 channels to chose from and no batteries going dead and as a plus I can play it through my...

I used a 24v to 12v power converter to power the radio I mounted it behind the passenger seat. I just bought a wiring kit for subwoofer amp and just hooked it to the batts it 24v configuration. Then I could hook up anything what I wanted to the 12v side of the converter

I mounted my stereo in the glove box using a bracket for a cobra cb radio and the speakers are attached to the support for the soft top by the seat

Make sure you keep that fifth wheel plate greased you don't want the fifth wheel to lock up to the trailer when trying to turn. That certainly would not be fun. 2cents

Don't know really anything about registration in Iowa but I would suggest that you try a different dmv I heard it has been known to work in other states

I am making a set 14' ramps out 1"X1"X1/4" angle iron the 10' ramps I made out doubled up 2X10s did not work well while I was unloading my 800 pound 6X6 atv it slide off one side and rolled on it's side thank goodness it did not roll over completely the thing the size of a small car and they are...