Search results

I am glad you posted this, I have a M332 ammo trailer in marble falls TX needs to come to Hayward CA. steve

DITTO if all this is ok it may be the pump, if the seals in it are getting weak it will lose pressure some times causing loss of steering. This also will make a squeak sound like when you over steer a car. When you turn wheel as Iron says,you turn it all the way to the stops.

We here in the cal guard had a hi strength chain (like used on weapons racks) bolted to the area by the shifter, then welded nut end. There was a L shaped 1/4" piece next to the shifter, you ran the chain over the steering wheel (around a spoke) then the lock went around the shifter and through...

HI YUP it is, the rest is 1/314 IN it is 1st battalion of the 314th Infantry Division, the other side would have the bumper # like T-123 or just a # 123 etc.

Here is some mv action on the Niles canyon railway, I was out with some of the guys to get a box car to put some passenger car seats in. The one we wanted was to hard to get to so we got this one,we now had a US ARMY loco pulling a USAF car (how often did this happen) so I had to take some...

HI new guy :grin: How long has it sat for,if more than a yr remove the injectors then squirt some light oil (3 seconds ea cyl) before trying to turn it,use a socket on the crank bolt and try to turn it I would stop if the eng binds and will not turn. This will tell you if there is any...

A nice truck I have seen some on GL over there but had no idea what shipping would cost got any prices ? Steve

I say it sounds to me like you've got something in the steering system about to break too,,check the rag joint it is at base of column at searing gear box rubber unit. I had a vette here doing some of your symptoms,and that's what it was if yours is bad DO NOT DRIVE IT till you change it. They...

Welcome from cali m35a2 here :driver:maybe tow it there with my "new toy" M984E1 :driver: STEVE

HI here is my civilian one its a 75 d200 4x2 with 360 eng 4 sp trany was an x gov one (not an mv) but civilian gov you can tell by no antenna hole in right fender and blank radio spot like in mv ones. This runs very strong and has full trim package.

I said in my 880 post I would post this one so here you go,the 1st 2 shots were in buckeye AZ where I had it moved to till I could get it shipped here,it runs n drives but needs some work.

HI guys nope have not tried to start it yet,but plans are to restore it to (as built) design.

HI mad thanks ok will add more I will post some of my 890 too (new thread) and maybe my civilian one too. The 2 out side pics were taken where it was in OK. this has less rust than the 890 and its from AZ.

I finely got some of it, looked it over and is mostly rust free too I just need to replace the troop seats. I have not tried to start it yet,fluids look good thought.

I can get one they are the same on most older dodge trucks, can get the terminal and you can buy the wire an make it also.

I would like to but think you could swing a fuel allowance from cali ? :shock: to bad its in the wrong Reading one here too.

I have the pig tail (terminal and 3" of wire)you show in pics also the whole alt harness ,pig tail 5$ free ride harness 50$ 10 $ ride.:clinto:

pipe trk I saw this and,,funny you said that I just happen to have a view of one,its an M756A2 mine also. I could send you more pics and dimensions if you want,,but cant have mine :)

I don't know but I have an m35a2 so I could fab 1 for you if wanted to send a drawing or ideas to me. I could do it there but a bit to far :D

I can get one have a lot of mopar parts and a ,, m880/m890/civilian one too.