Search results

Crude, but effective tire mount for 37" 12 bolt with runflat. Also, a little primer for the rust. Still needs paint. Put in hoist to lift spare and beer cooler. Along with repacking front wheel bearings, replaced tie rod ends, drag link, harmonic balancer, and new king pin bushings and springs.

Your next new tool. $23.00 plus $5.00 for the ride. Looks like you're making progress. https://www.4wdfactory.com/store/products.php?product=7%7B47%7D8%22-Hex-Wrench-%7B47%7D-Socket%2C-Upper-King-Pin-Tool

Here's a place for parts. Poly Performance JEEP/TRUCK & BUGGY :: Steering :: Knuckles & Inner Cs :: Dana 60 Knuckles & Inner Cs :: Parts Mike Dana 60 Front Lower King Pin Cap - 4X4 Off-Road Parts, JK Synergy Suspension Systems, Fox Racing Shox, Beard, CNC Brakes, Johnny Joint $47.95for that piece.

Repacked the front bearings, replaced tie rod, drag link, steering stabalizer, and harmonic balancer and all belts. Drove from Edinburg to Poplarville, MS ( dropped off M1009 axle for another member) then to Laplace, LA, picked up broken suburban, then back to Edinburg, MS. Total miles about...

U-joints.

I have a complete used one in Edinburg(39051). Pm me if interested. And if you need help swapping it out.

Mine was leaking at filter base.

Yep.

As I was! I see you are woking on Dana 60. Try this. Pirate4x4.Com - Extreme Four Wheel Drive.

Try this site for good info on GM 10 bolt. Steering Knuckle - Home. Am in the process of doing the same rebuild. PM me if you need help.

Try www.rockauto.com for the pipes form exhaust manifold to muffler, then 2 inexpensive aftermarket mufflers.

If you want to go back to stock, send a PM to me. Have set taken off M1009. In 39051.

Try www.rockauto.com. Looks like you got the flexplate for the 700R4, instead of the TH400. The Dorman number you need is 04340 and the ATP number is Z136. That Dorman number seems to correspond with the Advanced Auto part numbers.

FWIW, most Uhaul trucks have 2 in ball welded in place. Some of the newer trucks have a receiver tube just to the side of the ball hitch. Have pintle hitch in your hot little hand when you go put eyeballs on the vehicle.

Did the Doghead and installed other two relays for under dash.

Try these. I have had good luck with these folks. http://www.ezaccessory.com/Wheel_Adapter_8_Lug_6_5_To_8_Lug_6_5_p/8650-8650d.htm

What about adapting one of these? As IDM stated, you really have two 12v systems that work as one to start the engine, then return to 12v operation(oversimplification) "]

You can get the one combo and change the ball if needed for other aplications. I got the 2-5/16. Works well for me.

Bolt pattern is 8X6.5. Stud size is 9/16.

Already have alternators. May have to rebuild them. Kits on the way. Helps to have a stock truck to look at as a guide. Thanks for all the great info provided on this site.