Search results

Alright so I have finally secured heated shop space to bob my truck. (m35a2) I have my wheels and tires set to go on and I have all the equipment and skills necessary to complete the job. What I don't have are parts. I have a couple options I guess. First a friend offered me a set of rear...

I read a thread earlier about mounting the plates in the HEMMT wheels. The plates could be mounted on either side of the wheel for the fronts. There was some debate about this working correctly but I didn't see much resolution. 99% of the wheels I see are mounted with the plate on the back...

I got my wheels now, tires and valve stems. I've been reading about assembling them here and I've seen a couple posts mentioning silicone. Do I need to silicone the o-ring down to one side of the rim and then silicone the other side before assembly or not? Another thing I saw mentioned was...

So what's the deal with the purple signals or marker lights on my m35a2? I see orange ones on most all the other trucks. Do these actually function as a turn signal? On a side note: I can't get my signals to function at all. Before I start looking into it, is there a certain position that the...

Well, my neighbor got ahold of me last night and told me he had some tires for sale I might be interested in. He'd heard I was working on a Deuce. He's less than three miles up the road so I figured I'd go check em out. 100% tread 15.5/80R20 Michelin XLs I got em for slightly more than the...

I posted this question in my other thread but thought since it was a different issue I'd put up a new one. I got my Deuce Multi running today for the first time. It runs really nice and smooth, sounds strong but after about 1 minute at idle it starts bellowing oil out of the crancase vent tube...

I was wondering if there is an exploded view somewhere of the Hydraulic head on my 67 Multi-fuel? I searched a bit but no luck so far.

I think I might have found some tires locally. They're Michelin 16R20's I was told that they measure right at 48" tall. Would these be a good fit?

I have been trying to diagnose this Multi fuel engine for a few days now and I'm kind of at a loss as to where to go from here. The problem is no fuel to the injectors. 1. I checked and replaced the blown fuse on the lift pump. 2. I replaced the lift pump with one from Gimpyrob (thanks BTW)...

I recently acquired this 67' M35a2 and have been in the process of trying to get it running the last couple days. There was no fuel up to the injectors so I started at the lift pump which is where I believe the initial problem lies. First off the fuse was blown on the pump. Got that fixed and...

Hello, I'm Grant. Just found the site awhile back when looking for info on the M35a2 as I just bought one recently. I think I have found all the info and resources I'll ever need here. Thanks for creating such a nice site. I look forward to learning a lot. Grant