Search results

Re: RE: Need Some Help Finding A Switch I'm not too sure. I ran a search on the net and it comes up with this stock number, but the nomenclature sounds like it's the entire PTO. I'm going to go through the documentation on the PTO to see if I can find anything. I don't think I've ever run...

I need some help locating a switch for my 1031 contact truck. Here's the info from the plate on the door: PTO Magnetic Switch, P/O 11023716 Identified as MS1 in my wiring schematic This switch looks like a magnetic pickup to me. It's mounted in the shift housing of the PTO and sends the PTO...

Does anyone happen to have this downloaded on to their computer? If so, I could sure use a copy. Smitty

Thanks, that's what I was hoping to hear! Smitty

Re: RE: Manuals for 1031 Shop Set The site will bring the manual up, but won't grant me access. Smitty

Does anyone happen to know where I might be able to download or find hard copies of technical manuals for the shop set (4940-01-209-8825) mounted on my M1031? I believe the manuals are: TM 9-4940-562-23P TM 9-4940-562-13 Smitty

Will I need to drop the crank to install the new seal or can it be worked into place? Smitty

I finished replacing the fusible links in the harness. I grabbed both of the batteries out of my Blazer and hooked them up in the 1031. I found that there was power to the light circuit, but there was no power to the ignition circuit. After making repairs to a couple of connections in the...

Looks like I have a leaking rear main seal on my 6.2 :roll: . I know this was a big problem with these engines when they first came out. Have there been any improvements in the seals or new replacement process that I should be aware of prior to starting the repair? This is one of those jobs...

When I was in the Air Force we had to turn the historical records in with the vehicle when it went to DRMO. A indepth inspection was conducted on the vehicle and all problems were annotated. The historical records contained the maintenance data on the vehicle. This data used to be for the...

Anyone have any idea where I might get a welding cable to fit the panel in a Shop Equipment set mounted on a Contact Maintenance truck? I don't even have any idea where to start looking for something like this. Smitty

Thanks for the info guys. I have a good assortment of fusible link wire on hand so replacing them isn't a problem. I had just never noticed that the different splices for the fusible links had different numbers cast into them. I've replaced three of the links so far, two of them had patch...

OK I couldn't find anything except for casting numbers on the PTO. However, the instructions for the PTO list it as 52MK1005. I believe this number is for the entire PTO kit (just guessing...) Here's the company info: Muncie Power Products, inc. General Offices and Distribution Center P.O...

I have a burnt fusible link on a wire attached to the engine wiring harness block. The fusible link was blue and the wire is red. The splice between the fusible link and the wire has a number "2" on it. Is this number the wire number? Smitty

My 205 has a "Muncie" PTO. I'll try to get info for you today. Smitty