Search results

Color screens require backlight to be on, so turn the dashboard lights on when you turn on master

Thats only single ph 240, so 10kw is max

Photo the breakers and post

Is it a military shelter prewired? If yes, what is thesize of the main breaker?

I dont know mtvr, does it have a cat? CatET is required for much of cat access

You can operate injection pump by hand, for troubleshooting. Takes 2 soldiers unless you have really long arms. My guess is mpu same as robert. Unless something got knocked loose with the tip over. Might check all relays behind control panel

Correct, the small mpu on 804 is the speed sensor on the tranny on an 03 379 pete, the large is on an 03 w900 kenworth tranny

804 is a 10 wire genny. There are 2 ground wires bonded in the head 004 is a 12 wire, therefore it can be rewired as a dogleg wye

Can not be done

Parts were not easy to find. Board came from china, 2 weeks, 100 pin cable from italy or greece, and he sent a 50 pin first time by accident.

Use that link, it has all troubleshooting. If you remove gov actuator, take out bolts, and be easy, it slides to remove, and don’t destroy gasket when sliding. There is fuel in there as well

Disconnect line at tank, or before fuel pump, no possible way for that line to have pressure, it’s suction.

It only has one pickup line, right side under alternator, goes to fuel pump then filter. The line on left side is returned fuel

Take line loose at tank or before pump

You are having governor actuator issues.if you cant manually shut down, loosen fuel supply line at injection pump

Loosen throttle the other set skrew, and push lever the other way

Pull wires first at injection pump. If it doesn’t shut down, loosen fuel line at injection pump

The fuel shut off is the governor control box on the top of the injection pump. Did you adjust any of the rheostats on govern control behind control panel? https://www.steelsoldiers.com/attachment.php?attachmentid=586107&d=1444088245

https://www.steelsoldiers.com/showthread.php?174380-MEP-805B-806B-screen-dim-bright-tool-build&highlight=

Do you know i have already built the screen tool? I do loan it out, but it costs the freight both ways and a deposit