Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I don't like to unscrew the brake mastet cylinder cap to check the brake fluid level. This is something that has to be done as offen as possible and it takes time, rises the risc of brake fluid contamination and harms the color. So I drilled the brake master cylinder cap, put a flexible line...
When you do the job consider to rotate the heater 90 degree so the air inlet hose face down and can be conected to a hole that you can make to the triangular fixed panel under the hood side panel. This will make your truck look like the very late Deuces but most of all will keep the round...
I use dual 11X20 Matador tires made in Slovenia. Nobody knows them but they are new and very very chip. I don't use a spacer. I took some messurments: 1 inch at the bottom and 1 3/16 at the top, when the tire pressure is 65psi and there is a load of 1 ton. I had 1000 miles on this...