Search results

Ok. Pulled it out, it was a bit sticky. Cleaned every thing up and put it back together, still no start. Really running out of options. :(

Ok. I pulled that bolt out where the delivery valve is, and a spring fell out. Is that normal?

And where do I find this manual?

You know what. I have not tried that. I'll do that next. I did pull the bolt but not the whole valve out. I know its getting some fuel in the hydraulic head because with the plug out of the top and cranking the engine it will run fuel out of the top, but it might not be enough.

So I just got this m35a2. I got it running bit now it dies and wont start. Seems to be a fuel issue. I have fuel pressure and plenty of fuel getting to the injection pump, but nothing coming out of it. I pulled the hydraulic head and inspected it, seems to be fine. The clip and button are in...

ok guys its me again. looking for help with my deuce. the problem that just arised yesterday that has never happened before. i got called out las night to go pull a jeep out of being stuck. went to get my truck and it was hard to start (never done this before) it cranked, but took alot of...

if its still open diff u wont feel any resistance. i have broke 2 front axle shafts (notice my pic) both in reverse. i would say its worth pulling the shaft and checking before actually tearing into the diff. just a sugestion. my first one broke inside the carrier, and the second one just...

i thought about the gearing, and considered that the diesel only turns around 2500 RPM'S (give or take a little) not sure what the gas 6 cylinder turns, but im guessing its around the same. now a stock small block and big block can easily crank out 5000. with the gearing these things have i...

sure, ill sell some parts. what do u need?

o.k. guys. just an idea im kicking around. has any one ever put in a gas engine V8 in a deuce. i just accumulated a reo with the gas 6 cylinder. the guy says it ran when it was parked, but if it doesnt, my idea is to put in either a small block or big block chevy (whichever 1 i come up with...

how about running the tires as duels on the rear? do u know if they will fit?

do u guys know if u can run the 395's on the rear as duels? i have the tires on my truck and i seem to get some wheel hop when off road. (didnt do it with the 9.00's) and they do hit the bed and front fenders when it tweaks. any ideas on how to lift the truck up a little? and another problem is...

O.k. Now this sucks. I just had to leave my deuce stuck over night in the west tx sand hills due to another brocken axle shaft. Yes another meaning this would be the 2nd one i have broke. And this time i wasnt even being hard on it. So luckily i happen to be a heavy equipment operator and...

next weekend? what day? and time? and where? how many are going?

I believe i qualify also. I live in a crap hole called kermit. (ya, like the frog) so whats next?

Hi everyone. I dont know if i posted this in the right place. If i didnt, sorry.... I am looking for people in texas to network with or to get parts for my truck, or shop for other trucks. And even places to wheel. I live in west texas near odessa and midland. I drive my deuce all over...

i think u can see it in my pics. or if u want i can send u some

we hooked the ass end up to a CAT D6 and lifted it up off the ground and then picked up the front with a 950 loader. i put it in gear trying to see if we could get any movement in the front axle. the drivers side slightly turned, so we guessed the passenger side was the broken one. we took it...

PLEASE HELP ME!!! ya, i think i broke a front axle shaft. was moving a 77 ft. trailer house and POP. the front drive shaft turns, but the wheels dont. now does any one have any info i can use on taking this apart? i have never been into one of these,. are they very hard? i have done some GM...

How about my tire question, does anyon have an answer for that.? What are the biggest tires i can run duells with?