Search results

Rhode Island Military Vehicle Show 14 annual show Sept 6,7 2014. new larger location. Moved from air museum Due to -to many vehicles and venders -ran out of room. mil vehicles, fire trucks, antique heavy haulers. ill post flyer with all details later today. The show is on the former Navy...

2013 RI Military Vehicle Show sponsored by RIMVCC Saturday Sept 14 & Sunday Sept 15 on the grounds of Quonset Air Museum 488 Eccleston Ave North Kingston RI if any more info needed get in touch

I must have went right by it !! :doh: Great pictures guys. Well I got the peripherals removed tonight on the right Gonna pull the remaining plugs over the next day or so Bert did you use a ball peen on those?

Thanks for the picture a Bill I'm only seeing 6 in the pictures I know there's one behind the plate under the water pump near the timing chain cover and I thought For sure there was another just above where The tranny bolts up. I'm not sure why I thought there were so many Warren I had a cap...

Going to attempt to remove the peripheral items and Fender in the next day or so and remove the 4 plugs I can see and replace them with another five new ones. On drivers side. Now I know where those are also one in the back that I can't get to because of firewall and the one behind or below the...

thanks for all the replies. I should've mentioned they are the disc type so they seat against a ridge in the block. Tanner mentioned something about the "dome" side facing in. Also the napa guys said the same "dome" faces water jacket. now I am really confused.... TM1840a does not show the...

Ok so if I am reading correctly They should be flat if installed correctly not Remain slightly convex? If so they were installed wrong I knew the originals were perfectly flat

Ok so finally after getting the motor completed and installed After running her in etc I took it on the road after a 1/2 hr run in driveway. All appeared fine so off we went After a mile and a half she over heats.... Open the hood and a core plug ( some people call it a "freeze plug" ) had...

Congrats It's neg ground It uses 2 12v batts Do your self a favor check all your wires before you Power up so ya don't have a fire:wink:

Why did the forum gods lock his account out? Try to stick around

Up here if you can find a basket case they are between 3k-4k. 4k they are running but still a mess. you got a great deal on that one. Good luck!

Carter thanks Hinge works fine on mine. Like I said in pm I wanted to sand blast and wasnt sure if there was A bushing around those bolts. I'll try again to break Them out, if not I'll leave them and grind it by hand Fun fun I need to locate a copy of that parts manual

Warren I know, I know right!? Sometime in its day the goverment gods saw fit to convert it Probably when they installed the radios in the back. Would've like to put it in the back but I put the radios Back in the way they had them. By the way when I take to your show next year , will you walk...

Yep! I'm missing 1 number 8 nut aua Carter - thanks

Carter Thank you I had installed it wrong. I had one of the nuts #8 behind that Stop cam #4. So it looks like the release lever ( not shown) would Sit between the 2 nuts # 8 then? With the spring(not shown) Against the bolt # 8 closest to the flange # 5

Ok so to take a break from minor issues on my newly rebuilt engine (has become way to tedious) I decided to remount my spare tire carrier at cab to pass a day or so before I jump back in. Its been off for three years (since start of resto) Thing is- I cant remember if there is some sort of...

I have a few hundred pics to post from the point above to The complete engine rebuild (hopefully its done this up coming week) Unfortunately for me every thing you could possibly replace Had to be replaced. On top of recieving bad parts or misrepresented Parts its been a nightmare!! I hope to...

I have a few hundred pics to post from the point above to The complete engine rebuild (hopefully its done this up coming week) Unfortunately for me every thing you could possibly replace Had to be replaced. I hope to resize for posting shortly. I may post in my album due to number of threads...

Al I want to thank you for posting that manual. Apparently it is a rare as hens teeth. So much so The one guy I found that had one would only let me look through It but not take it to scan. You've saved me a fruitless Hunt

I did find someone today with an original But he is reluctant to let me even hold it! He has read the info to me.... Understandable as it obviously can't be replaced I'm going to ask if I can scan it and make a PDF In the mean time the search continues