Search results

For reference here are the CTIS pressures:

My A2 has the big primary fuel filter. Post a pic of yours, I'd like to see it.

CTIS light will stay on solid when it has reach the correct pressure for all tires. Try airing down right when you start the truck to get them all the same and them back up to HWY.

After installing LEDs on the truck I decided I'd like the front amber running lights to be on with the headlights. I've seen ways to jumper wires at the light switch, and even a modified wiring harness that does the same thing. Since the truck has a marker light right there that runs with the...

With the current prices of M939 series trucks I'd say buy an ugly runner, keep the trans and part / scrap the rest. Done right the trans would be free.

This is the large fuel filter in the drivers wheelwell (black can). From here it goes up to the small spin on filter on the engine block. Just changed mine last month and it was full of crap and rust. This is not present on your truck?

Did you air down using the CTIS? Any trouble getting around?

Duh. The box is full of batteries for the hybrid drive.

Read the -10 Technical Manual (TM), lots of good info in there. http://www.steelsoldiers.com/showthread.php?79228-TM-s-for-the-939-series-trucks

I think that was it. Glad hand cover was on, but no vent that I could see. It operates like it should now, thanks! I'll have to fabricate a vent of some sort so the cover isn't just dangling.

Hmm, I'll have to check when I get home but I'm almost sure both front glad hand covers are on tight.

The parking brake on my truck is not releasing the spring brakes when disengaged. I need to use the spring brake override on the dash in order to move the truck. The drivetrain parking brake works as it should. I can't find a troubleshooting guide in the TMs that cover the air part of the...

Sounds like an adventure. Enjoy the new truck!

Does it come from the CTIS manifold down near the front floor of the cab or elsewhere?

It's easy. WI has a special form and plates for military vehicles. Pay once and the plates are good for as long as you own the truck! You'll need to fill out an MV1 and an MV2592 form, both are available on the DMV website. Follow the instructions and send everything they want including a...

I think sometimes people forget what it was like when they were new to this hobby. It can be pretty overwhelming. Here are a few MWO numbers that I have found for my M923A2: 272-20-5 front shackles 272-20-7 brake proportioning 272-24-1 spring brake control valve improvement 272-20-8...

My CTIS generally works good. When it exibits the flashing lights (usually 4 I think) I do the following: 1. Start truck and let it build air pressure (CTIS lights will start flashing during this part). 2. Shut down truck. 3. Start truck again and immediately press one of the low pressure...

Mike and Seth are both GL guys and work in the base on the GL lot.

Great, thanks!

I have the bows and corners, but I need to make / buy some uprights in order to complete my tarp assembly. Can somebody tell the the size I need? If I make them I want the size to be exact and if I find a place to buy them from I don't want to end up with duece onces by accident (I assume they...